[Condor-users] What should I do to connect machines?

[Genie Jhang <geniejhang@xxxxxxxxxxx>]

Thanks a lot for the helps all of you gave to me.

 

But, I found out there is another problem at the very beginnig of the configuration.

 

Our lab. has 9 server computers, so I installed condor all the computers

 

1-8 have ip address from 192.168.0.101 to 192.168.0.108, respectively.

 

9 has one public ip and one private ip 192.168.0.109.

 

So, 9 has installed condor with options "--prefix=/condor --local-dir=/home/condor --type=execute,submit,manager --owner=condor"

 

and the others, 1-8, have installed condor with options "--prefix=/condor --local-dir=/home/condor --type=execute,submit --central-manager=192.168.0.109 --owner=condor".

 

But, after I start condor_master at 9, then type condor_status, there isn't any other machines.

 

It shows me only the below.

 

-------------------------------------

Name               OpSys      Arch   State     Activity LoadAv Mem   ActvtyTime

slot1@pheko09      LINUX      INTEL  Owner     Idle     1.000   506  0+00:00:07
slot2@pheko09      LINUX      INTEL  Owner     Idle     0.050   506  0+00:00:08
slot3@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:09
slot4@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:10
slot5@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:11
slot6@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:12
slot7@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:13
slot8@pheko09      LINUX      INTEL  Owner     Idle     0.000   506  0+00:00:06
                     Total Owner Claimed Unclaimed Matched Preempting Backfill

         INTEL/LINUX     8     8       0         0       0          0        0

               Total     8     8       0         0       0          0        0

-------------------------------------

 

What should I do to connect other machines to 9?

 

Please help me.

 

Thanks you for reading this.