Hi,
While running a transactional benchmark 'conswtch' I got
following error on Simics prompt.
What could be the problem in this case? I observed same
error while running other transactional benchmark as
well.
-----------------------------------------------------------------------------
Caught time breakpoint
Turning I-STC off and flushing
old data
Turning D-STC off and flushing old data
D-STC is currently
*OFF*
I-STC is currently *OFF*
Deprecation warning: variable assignment
without variable prefix $.
[cpu0 info] Note that on this cpu,
instruction-fetch-trace is implemented using instruction-cache-access-trace with
a suitable cache line size.
[cpu1 info] Note that on this cpu,
instruction-fetch-trace is implemented using instruction-cache-access-trace with
a suitable cache line size.
[cpu2 info] Note that on this cpu,
instruction-fetch-trace is implemented using instruction-cache-access-trace with
a suitable cache line size.
[cpu3 info] Note that on this cpu,
instruction-fetch-trace is implemented using instruction-cache-access-trace with
a suitable cache line size.
cpu0: instruction-cache-access-trace
cpu1:
instruction-cache-access-trace
cpu2: instruction-cache-access-trace
cpu3:
instruction-cache-access-trace
Caught time breakpoint
successful
installation of the ruby timing model.
Ruby Timing Mode
Creating event
queue...
Creating event queue done
Creating system...
Processors:
4
failed assertion 'network_num <
m_virtual_networks' at fn void
SimpleNetwork::checkNetworkAllocation(NodeID, bool, int) in
network/simple/SimpleNetwork.C:203
failed assertion 'network_num <
m_virtual_networks' at fn void
SimpleNetwork::checkNetworkAllocation(NodeID, bool, int) in
network/simple/SimpleNetwork.C:203
At this point you might
want to attach a debug to the running and get to the
crash site; otherwise
press enter to continue
PID: 29313
---------------------------------------------------------------------------
Thanks,
Anup