[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Condor-users] (no subject)



The output is still the same when I change the directory.

Directory of C:\condor\execute\dir_480

06/13/2007  09:16 AM    <DIR>          .
06/13/2007  09:16 AM    <DIR>          ..
06/13/2007  09:16 AM                 0 build-err.txt
06/13/2007  09:16 AM                 0 build-out.txt
06/13/2007  09:13 AM         2,529,988 build_looks.exe
06/13/2007  09:13 AM                53 condor_exec.bat
06/13/2007  09:13 AM             5,202 long_run.props
06/13/2007  09:13 AM            66,512 middle_east_targets.txt
               6 File(s)      2,601,755 bytes
               2 Dir(s)  72,932,601,856 bytes free
 Volume in drive C has no label.
 Volume Serial Number is F0B4-3946

 Directory of C:\condor\execute\dir_480

06/13/2007  09:16 AM    <DIR>          .
06/13/2007  09:16 AM    <DIR>          ..
06/13/2007  09:16 AM                 0 build-err.txt
06/13/2007  09:16 AM                 0 build-out.txt
06/13/2007  09:13 AM         2,529,988 build_looks.exe
06/13/2007  09:13 AM                53 condor_exec.bat
06/13/2007  09:13 AM             5,202 long_run.props
06/13/2007  09:13 AM            66,512 middle_east_targets.txt
               6 File(s)      2,601,755 bytes
               2 Dir(s)  72,932,597,760 bytes free

I went to the computer and typed "dir" to see what was in
C:\condor\execute\dir_480 and it shows two <DIR> being created one of .
and the other .. just as shown above. What do you think is in there and
how would I access that?

Also, the build.bat file is condor_exec.bat. I accidentally left out
build_looks.exe and the program took awhile to run but never would stop
because it did not have the executing file to call on. But when it was
sent, this is what happens (stated above).

Josh Richardson
Integrity Applications Incorporated Intern (IAI)
703-378-8672 ext 632
 

-----Original Message-----
From: condor-users-bounces@xxxxxxxxxxx
[mailto:condor-users-bounces@xxxxxxxxxxx] On Behalf Of Kewley, J (John)
Sent: Wednesday, June 13, 2007 8:52 AM
To: Condor-Users Mail List
Subject: Re: [Condor-users] (no subject)

Neither looks.txt nor looks_angles.txt are there.

Notice there is no build.bat either, but that gets renamed
as condor.bat. All other files needed to run your job (at 
least those you mentioned in your submit file are there.

If you creat a new directory and copy all those files into it and 
run build.bat, what does the resulting directory structure look like?

Was that dir done before or after the program was run?
Maybe you should do a dir before AND after the run of build_looks.exe
to see what files are created

cheers

JK

> -----Original Message-----
> From: condor-users-bounces@xxxxxxxxxxx
> [mailto:condor-users-bounces@xxxxxxxxxxx]On Behalf Of 
> Richardson, Joshua
> Sent: Wednesday, June 13, 2007 1:10 PM
> To: Condor-Users Mail List
> Subject: Re: [Condor-users] (no subject)
> 
> 
> Ok. So the output after "dir" is:
> 
> Directory of C:\condor\execute\dir_1728
> 
> 06/13/2007  07:54 AM    <DIR>          .
> 06/13/2007  07:54 AM    <DIR>          ..
> 06/13/2007  07:54 AM                 0 build-err.txt
> 06/13/2007  07:54 AM                 0 build-out.txt
> 06/13/2007  07:51 AM         2,529,988 build_looks.exe
> 06/13/2007  07:51 AM                46 condor_exec.bat
> 06/13/2007  07:51 AM             5,202 long_run.props
> 06/13/2007  07:51 AM            66,512 middle_east_targets.txt
>                6 File(s)      2,601,748 bytes
>                2 Dir(s)  133,630,238,720 bytes free
> 
> I looked on the computer that is running the job and it seems to be a
> temp folder and disappears after the job is completed.
> 
> The log is:
> 
> 00 (091.000.000) 06/13 07:55:00 Job submitted from host:
> <192.168.168.98:1112>
> ...
> 001 (091.000.000) 06/13 07:55:08 Job executing on host:
> <192.168.168.197:1115>
> ...
> 005 (091.000.000) 06/13 07:55:09 Job terminated.
> 	(1) Normal termination (return value 0)
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Run Remote Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Run Local Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Total Remote Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Total Local Usage
> 	640  -  Run Bytes Sent By Job
> 	2601748  -  Run Bytes Received By Job
> 	640  -  Total Bytes Sent By Job
> 	2601748  -  Total Bytes Received By Job
> 
> Josh Richardson
> Integrity Applications Incorporated Intern (IAI)
> 703-378-8672 ext 632
>  
> 
> -----Original Message-----
> From: condor-users-bounces@xxxxxxxxxxx
> [mailto:condor-users-bounces@xxxxxxxxxxx] On Behalf Of 
> Kewley, J (John)
> Sent: Wednesday, June 13, 2007 4:30 AM
> To: Condor-Users Mail List
> Subject: Re: [Condor-users] (no subject)
> 
> > Ok. So I do not need the Arguments or the 
> > transfer_output_files set. My
> > build.bat is start build_looks.exe -f long_run.props. 
> Should there be
> > more there to get a file returned? When I submit it like 
> this, the log
> > is:
> > ...
> > It returns nothing and finishes within a couple of seconds. 
> Outside of
> > Condor it takes minutes for the program to run so I know this is not
> > correct.
> 
> If build.bat takes no params, then no arguments are neccessary.
> 
> Does your job create those files in a subdirectory? If so, 
> condor won't
> return them
> automatically, only the ones created in the main directory 
> where the job
> runs.
> 
> Try adding a "dir" at the end of your .bat file so you can see what
> files are in 
> that directory.
> 
> JK
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to 
> condor-users-request@xxxxxxxxxxx with
> a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at: 
> https://lists.cs.wisc.edu/archive/condor-users/
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to 
> condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at: 
> https://lists.cs.wisc.edu/archive/condor-users/
> 

_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with
a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at: 
https://lists.cs.wisc.edu/archive/condor-users/