[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Condor-users] SafeSock::my_ip_str() failed to connect, errno = 10065

We are using Condor v7.6.6 on Windows desktops.

On 02/23/12, around 02:30, there happened an network problem and the machines that were powered on, got a new IP address, but Condor continues to try to communicate using the old IP address.
The message that appears in the MasterLog is:

02/18/12 23:04:38 DaemonCore: command socket at <>
02/18/12 23:04:38 DaemonCore: private command socket at <>
02/22/12 00:04:38 Preen pid is 3580
02/23/12 00:04:38 Preen pid is 4696
02/23/12 02:30:18 SafeSock::my_ip_str() failed to connect, errno = 10065
02/23/12 02:30:18 SafeSock::my_ip_str() failed to connect, errno = 10065
02/23/12 02:30:18 sendMsg:sendto failed - errno: 0
02/23/12 02:30:18 Failed to send non-blocking update to <>.

The new IP address is

Reply from bytes=32 time=2ms TTL=125

Is there any way to configure Condor to self recover from this issue?


This message is intended solely for the use of its addressee and may contain privileged or confidential information. All information contained herein shall be treated as confidential and shall not be disclosed to any third party without Embraer’s prior written approval. If you are not the addressee you should not distribute, copy or file this message. In this case, please notify the sender and destroy its contents immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações privilegiadas e confidenciais. Todas as informações aqui contidas devem ser tratadas como confidenciais e não devem ser divulgadas a terceiros sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor, notifique o remetente da mesma e destrua imediatamente a mensagem.