Re: [Condor-users] Building 7.8 on SL6

[Tim St Clair <tstclair@xxxxxxxxxx>]

That requirement is for UW-esk builds only, proper builds do not have that restriction.  It's entirely possible that some of the globus bits require "proper build" verification if you are using epel channels.  I will punt on that topic to Jamie, as we don't not ship globus bits in our supported distribution.  

Either way, the solution seems pretty consistent here:
cmake-2.8.X-Y.fc#.src.rpm rebuild 

http://koji.fedoraproject.org/koji/buildinfo?buildID=314439

Cheers,
Tim

----- Original Message -----
> From: "Anthony Tiradani" <tiradani@xxxxxxxx>
> To: condor-users@xxxxxxxxxxx
> Sent: Friday, May 11, 2012 2:23:06 PM
> Subject: Re: [Condor-users] Building 7.8 on SL6
> 
> In Scientific Linux Fermi (SLF) 6.1 and 6.2, you get CMake 2.6.4.
> According to this page,
> https://condor-wiki.cs.wisc.edu/index.cgi/wiki?p=BuildModernization,
> CMake 2.8.3 is required.
> 
> In the past, I have had to manually install CMake 2.8.x in order to
> build Condor.
> 
> Thanks,
> 
> Anthony Tiradani
> 
> 
> On 05/11/2012 02:01 PM, Tim St Clair wrote:
> > So I verified the the check for cmake_minimum_required(VERSION 2.6)
> > exists in the repos for quite some time now.
> >
> > My best guess is that there was something odd about your SL6.1 (not
> > up to date?) - cmake.?.? I've also verified ours builds just fine
> > against latest RHEL 6.X.
> >
> > Cheers,
> > Tim
> >
> > ----- Original Message -----
> >> From: "William Strecker-Kellogg"<willsk@xxxxxxx>
> >> To: "Condor-Users Mail List"<condor-users@xxxxxxxxxxx>
> >> Sent: Friday, May 11, 2012 1:23:33 PM
> >> Subject: Re: [Condor-users] Building 7.8 on SL6
> >>
> >> Very odd, maybe I'm missing a package or something, a fresh clone
> >> on
> >> Scientific Linux 6.1 of the V7_8_0-branch gives the same results:
> >>
> >> $ cmake .
> >> ...
> >> $ make grid_manager
> >>
> >> Scanning dependencies of target grid_monitor
> >> make[3]: *** No rule to make target
> >> `src/condor_gridmanager/grid_monitor', needed by
> >> `src/condor_gridmanager/CMakeFiles/grid_monitor'.  Stop.
> >> make[2]: ***
> >> [src/condor_gridmanager/CMakeFiles/grid_monitor.dir/all]
> >> Error 2
> >> make[1]: ***
> >> [src/condor_gridmanager/CMakeFiles/grid_monitor.dir/rule]
> >> Error 2
> >> make: *** [grid_monitor] Error 2
> >>
> >> Whereas if do exactly the same on Fedora 16, it works just fine...
> >>
> >> Ah..just got it, cmake 2.6 vs 2.8. I built the F16 cmake on SL6
> >> and
> >> upgraded it and it works fine.  Perhaps update the
> >> *cmake_minimum_required(VERSION 2.6)*
> >> header?
> >>
> >> Thanks,
> >> -Will
> >>
> >>
> >> On 05/10/2012 01:07 PM, Tim St Clair wrote:
> >>> I just pulled and built fine..
> >>>
> >>>
> >>> make grid_monitor
> >>> Scanning dependencies of target grid_monitor
> >>> Generating grid_monitor
> >>> Built target grid_monitor
> >>>
> >>> Might want to try:
> >>>
> >>>
> >>> git clean -xdf
> >>> #just in case you have stale data.
> >>>
> >>> cmake .
> >>> make grid_manager
> >>>
> >>> Cheers,
> >>> Tim
> >>>
> >>>
> >>>
> >>> ----- Original Message -----
> >>>> From: "William Strecker-Kellogg"<willsk@xxxxxxx>
> >>>> To: "Condor-Users Mail List"<condor-users@xxxxxxxxxxx>
> >>>> Sent: Thursday, May 10, 2012 10:43:02 AM
> >>>> Subject: [Condor-users] Building 7.8 on SL6
> >>>>
> >>>> Hi all,
> >>>>
> >>>> I'm trying to build the latest 7.8.0 head on SL6 and am
> >>>> encountering
> >>>> the
> >>>> following problem:
> >>>>
> >>>> $ cd condor-7.8/
> >>>> $ cmake .
> >>>> $ make grid_monitor
> >>>> ...
> >>>> make[3]: *** No rule to make target
> >>>> `src/condor_gridmanager/grid_monitor', needed by
> >>>> `src/condor_gridmanager/CMakeFiles/grid_monitor'.  Stop.
> >>>> make[2]: ***
> >>>> [src/condor_gridmanager/CMakeFiles/grid_monitor.dir/all]
> >>>> Error 2
> >>>> make[1]: ***
> >>>> [src/condor_gridmanager/CMakeFiles/grid_monitor.dir/rule]
> >>>> Error 2
> >>>>
> >>>> Can anyone help me figure out what is going on? The latest
> >>>> source
> >>>> I'm
> >>>> building is the head of V7_8_0-branch today which is commit:
> >>>> a3723b2707404276772aea00a891a25d9244a767
> >>>>
> >>>> Thanks,
> >>>> -Will
> >>>> _______________________________________________
> >>>> Condor-users mailing list
> >>>> To unsubscribe, send a message to
> >>>> condor-users-request@xxxxxxxxxxx
> >>>> with a
> >>>> subject: Unsubscribe
> >>>> You can also unsubscribe by visiting
> >>>> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >>>>
> >>>> The archives can be found at:
> >>>> https://lists.cs.wisc.edu/archive/condor-users/
> >>>>
> >>> _______________________________________________
> >>> Condor-users mailing list
> >>> To unsubscribe, send a message to
> >>> condor-users-request@xxxxxxxxxxx
> >>> with a
> >>> subject: Unsubscribe
> >>> You can also unsubscribe by visiting
> >>> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >>>
> >>> The archives can be found at:
> >>> https://lists.cs.wisc.edu/archive/condor-users/
> >>>
> >> _______________________________________________
> >> Condor-users mailing list
> >> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
> >> with a
> >> subject: Unsubscribe
> >> You can also unsubscribe by visiting
> >> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >>
> >> The archives can be found at:
> >> https://lists.cs.wisc.edu/archive/condor-users/
> >>
> > _______________________________________________
> > Condor-users mailing list
> > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
> > with a
> > subject: Unsubscribe
> > You can also unsubscribe by visiting
> > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >
> > The archives can be found at:
> > https://lists.cs.wisc.edu/archive/condor-users/
> 
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
> with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/
>