Re: [HTCondor-users] Simple priority howto.

Mailing List Archives Public Access	UW Madison Computer Sciences Department Computer Systems Lab

Thanks Greg.

Unfortunately that does not happening.

Even while reducing the negotiating cycle to 1 second and changing the job to random 30 to 60 seconds.

What do you think about static effective priorities? At first it sounds like a bad idea but it is possible with setting PRIORITY_HALFLIFE to infinity and configure the priority manually.

How preemption will happen with static configuration?

David.

Get Outlook for Android

From: HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx> on behalf of Greg Thain <gthain@xxxxxxxxxxx>
Sent: Thursday, February 4, 2021 5:07:13 PM
To: htcondor-users@xxxxxxxxxxx <htcondor-users@xxxxxxxxxxx>
Subject: Re: [HTCondor-users] Simple priority howto.

I think if you set your PRIORITY_HALFLIFE to 1 you'll see it reach equilibrium a lot faster.

-greg

On 2/4/21 3:43 AM, duduhandelman@xxxxxxxxxxx wrote:

Maybe it's related to the Negotiator interval which is 30?

From: HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx> on behalf of duduhandelman@xxxxxxxxxxx <duduhandelman@xxxxxxxxxxx>
Sent: 04 February 2021 11:40
To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
Subject: Re: [HTCondor-users] Simple priority howto.

Thanks Thomas,

After 90 minutes it looks like that.

Competed jobs.

User one: 1234
User two: 654

Effective Prio

User one: 16037

User two: 32922

Thanks

David

From: HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx> on behalf of thomas.hartmann@xxxxxxx <thomas.hartmann@xxxxxxx>
Sent: 04 February 2021 11:27
To: htcondor-users@xxxxxxxxxxx <htcondor-users@xxxxxxxxxxx>
Subject: Re: [HTCondor-users] Simple priority howto.

Hi David,

what does the current condor_userpriority values look like for the two
users?
Ideally User two should have a smaller value, i.e., higher priority, so
that it would preferred during the next negotiations.

Cheers,
   Thomas

On 04/02/2021 10.09, duduhandelman@xxxxxxxxxxx wrote:
> Hi Again,
> TheGROUP_QUOTA option is working very well for one level of groups each
> group gets the correct share.
>
> I'm trying to figure how to do that using user prio.
> Using pslots and PRIORITY_HALFLIFE = 3600
> No Preemption.
> Both user in a single GroupQuota group.
>
> I'm running same jobs of 30 seconds sleep using single core from 2 users
> each using deferent submitter.
>    User one Priority Factor 1000
>    User two Priority Factor 5000
> After 30 minutes completed jobs looks like that
>    User one: 399
>    User two: 255
>
> What am I missing here? Changing the factor of user two to 50000 will
> get a lot less activity
>
> Thanks
> David.
> ------------------------------------------------------------------------
> *From:* HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx> on behalf of
> Greg Thain <gthain@xxxxxxxxxxx>
> *Sent:* 02 February 2021 23:09
> *To:* htcondor-users@xxxxxxxxxxx <htcondor-users@xxxxxxxxxxx>
> *Subject:* Re: [HTCondor-users] Simple priority howto.
>
>
> On 2/2/21 2:31 PM, duduhandelman@xxxxxxxxxxx
> <mailto:duduhandelman@xxxxxxxxxxx> wrote:
>> Hi Agian.
>> Will those two options will work together?
>
>
> Yes.
>
>
> -greg
>
>
> _______________________________________________
> HTCondor-users mailing list
> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/htcondor-users/
>
_______________________________________________
HTCondor-users mailing list
To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/htcondor-users/

Mailing List Archives

Public Access

Re: [HTCondor-users] Simple priority howto.