Did you verify the MD5 sums of the downloaded ISOs? It sounds like
perhaps there was a problem in the download....
Regards,
Dan
Abdullah Kayi wrote:
Hi all,
I compiled Ruby and Opal successfully using gcc 3.4.6 on an x86_64
Linux machine. I am using gems2.1 and I used simics 3.0.31 in that
process. However for the checkpoint creation as suggested earlier I
tried to use simics 2.2.19.
But again I have problems with the checkpoint creation, here are the
details of the error:
I tried to install Solaris 10;
OS_INSTALL_CD_1=/home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v1.iso
OS_INSTALL_CD_2=/home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v2.iso
after i run ./naked-check-create.sh 16 65536 I am again getting some
warnings and errors:
I am pasting whatever I see on my konsole, I appreciate any comments on
this.
Using CD-ROM image file:
/home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v1.iso
setting media file-cd25B_2_6
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
exec: No such file or directory
*** [text-console] Window output disabled
[qlc24B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0xc
[qlc24B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0xe
[qlc24B_2 info] Disk registering: Loop id: 0xf
[qlc24B_2 info] Disk registering: Loop id: 0x10
[qlc24B_2 info] Disk registering: Loop id: 0x11
[qlc24B_2 info] Disk registering: Loop id: 0x12
[qlc24B_2 info] Disk registering: Loop id: 0x13
[qlc24B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0x6
[qlc28B_2 info] Disk registering: Loop id: 0x7
[qlc28B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x2
[qlc28B_2 info] Disk registering: Loop id: 0x9
[qlc28B_2 info] Disk registering: Loop id: 0xa
[qlc28B_2 info] Disk registering: Loop id: 0xb
[qlc28B_2 info] Disk registering: Loop id: 0xc
[qlc28B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0xe
[qlc28B_2 info] Disk registering: Loop id: 0xf
[qlc28B_2 info] Disk registering: Loop id: 0x10
[qlc28B_2 info] Disk registering: Loop id: 0x11
[qlc28B_2 info] Disk registering: Loop id: 0x12
[qlc28B_2 info] Disk registering: Loop id: 0x13
[qlc28B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x15
[qlc24B_2 info] Disk registering: Loop id: 0x6
[qlc24B_2 info] Disk registering: Loop id: 0x7
[qlc24B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x9
[qlc24B_2 info] Disk registering: Loop id: 0xa
[qlc24B_2 info] Disk registering: Loop id: 0xb
New VTOC written to disk:
Label : SIMDISK cyl 10938 alt 2 hd 19 sec 80
RPM : 7200
Data cylinders : 10938
Alt cylinders : 2
Physical cylinders : 10940
Heads : 19
Sectors per Track : 80
Number of data blocks : 16625760
Partition Table:
Number Tag Flag Start End
Size
2 5 (backup) 1 (unmountable) 0 16625759
16625760
Capturing output to 'install-log.txt'
Image memory limited to 8 G
Start at : Sat Mar 15 01:31:31 2008
[system info] Disabling slave processors.
[system info] Enabling slave processors.
[qlc24B_2 info] Undocumented MAILBOX command: 0x5a
[qlc28B_2 info] Undocumented MAILBOX command: 0x5a
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[hme0 info] Dropping packet, not connected to network. (Will not warn
again)
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc28B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
[qlc24B_2 info] Note: Abort Command Received - Something probably went
wrong
Many thanks,
Abdullah
_______________________________________________
Gems-users mailing list
Gems-users@xxxxxxxxxxx
https://lists.cs.wisc.edu/mailman/listinfo/gems-users
Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
--
http://www.cs.wisc.edu/~gibson [esc]:wq!
|
|