The original system.conf file that comes with the Gems release
contains the parameters that worked for us.
Make sure that the directory /home/apokay/checkpoint_files exists
before you run the script.
-Derek
On Sun, Mar 16, 2008 at 11:56 AM, Abdullah Kayi <apokayi@xxxxxxxxx> wrote:
> To narrow down the potential mistake(s), can anybody kindly send his/her
> system.conf file that worked fine with naked-check-create.sh to me?
> My host system settings are gcc 3.4.6, x86_64 Linux (ubuntu gutsy 7.10),
> simics 2.2.19, gem 2.1.
>
> Thanks in advance,
>
> Abdullah
>
>
> On Sun, Mar 16, 2008 at 12:41 AM, Abdullah Kayi <apokayi@xxxxxxxxx> wrote:
> >
> > I tried to debug the error by going to $(SIMICS_DIR)/home/sarek and tried
> to run the installation script directly from there with:
> >
> > ./simics -x sol10-cd-install-1.simics
> >
> > I am getting the following errors when I tried to install Solaris10. I am
> not sure if this new set of errors would help to solve the problem.
> > I am actually not even sure what I am doing is viable in this situation.
> Any help is appreciated.
> >
> > Checking out a license... done: academic license.
> > Looking for additional Simics modules in ./modules
> >
> > +----------------+ Copyright 1998-2005 by Virtutech, All Rights
> Reserved
> > | Virtutech | Version: simics-2.2.19
> > | Simics | Compiled: Tue Aug 16 20:23:17 CEST 2005
> > +----------------+
> > www.simics.com "Virtutech" and "Simics" are trademarks of
> Virtutech AB
> >
> > Type 'copyright' for details on copyright.
> > Type 'license' for details on warranty, copying, etc.
> > Type 'readme' for further information about this version.
> > Type 'help help' for info on the on-line documentation.
> >
> > Using CD-ROM image file: /home/apokayi/Solaris/sol-10-u4-ga-sparc-v1.iso
> >
> >
> > setting media file-cd25B_2_6
> > [fc0_image error] Error creating /home/apokayi/checkpoint_files
> >
> >
> >
> > /disk/platinum.disk: No such file or directory
> > [error] setting attribute files in fc0_image:
> > illegal value
> > Error while loading a configuration: Failed to initialize all objects
> > This has left the configuration system in an inconsistent state.
> > Restarting Simics is recommended.
> >
> > Failed to initialize all objects
> >
> > Failed loading the configuration in Simics. This is probably
> > due to some misconfiguration, or that some required file is
> > missing. Please check the above output for error messages
> >
> > [platinum-common.simics:227] the command did not complete properly;
> interrupting script
> > [sol10-cd-install-1.simics:63] the command did not complete properly;
> interrupting scrip
> >
> >
> > Many thanks,
> >
> > Abdullah
>
>
> _______________________________________________
> Gems-users mailing list
> Gems-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> Use Google to search the GEMS Users mailing list by adding
> "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>
>
>
|