Date: | Mon, 17 Mar 2008 15:19:56 +0800 |
---|---|
From: | "wxq" <wxq@xxxxxxxxxxxxxxxxxx> |
Subject: | [Gems-users] Naked checkpoint creation error |
Hi all,
I have successfully compiled Ruby and Opal on an
x86_linux machine. But I meet a error on creating a naked checkpoint.
Followed the setup steps in “Automated Checkpoint
Generation”, I changed the OS_NAME and SIMICS_OS_INSTALL_CD_1(2) variables and
adjusted the related paths. However, there is some warnings and errors after I
run "./naked-check-create.sh 16 65536" .
The related software I use is solaris9 and simics
2.2.19.
The simics running information is as
follows:
$ ./naked-check-create.sh 16 65536
number of boards is 4, number of nodes is 1 +----------------+
Copyright 1998-2005 by Virtutech, All Rights Reserved
| Virtutech | Version: simics-2.2.19 | Simics | Compiled: Tue Aug 16 20:22:30 CEST 2005 +----------------+ www.simics.com "Virtutech" and "Simics" are trademarks of Virtutech AB Type 'copyright' for details on
copyright.
Type 'license' for details on warranty, copying, etc. Type 'readme' for further information about this version. Type 'help help' for info on the on-line documentation. Using CD-ROM image file:
/home/user/workspace/scratch/checkpoint_files/sol-9-u7-sparc-v1.iso
setting media file-cd25B_2_6 CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted CRAFF warning: File was not closed cleanly; may be corrupted [qlc24B_2 info] Disk registering: Loop id: 0x3 [qlc24B_2 info] Disk registering: Loop id: 0xc [qlc24B_2 info] Disk registering: Loop id: 0xd [qlc24B_2 info] Disk registering: Loop id: 0xe [qlc24B_2 info] Disk registering: Loop id: 0xf [qlc24B_2 info] Disk registering: Loop id: 0x10 [qlc24B_2 info] Disk registering: Loop id: 0x11 [qlc24B_2 info] Disk registering: Loop id: 0x12 [qlc24B_2 info] Disk registering: Loop id: 0x13 [qlc24B_2 info] Disk registering: Loop id: 0x14 [qlc28B_2 info] Disk registering: Loop id: 0x3 [qlc24B_2 info] Disk registering: Loop id: 0x4 [qlc28B_2 info] Disk registering: Loop id: 0x4 [qlc28B_2 info] Disk registering: Loop id: 0x5 [qlc28B_2 info] Disk registering: Loop id: 0x6 [qlc28B_2 info] Disk registering: Loop id: 0x7 [qlc28B_2 info] Disk registering: Loop id: 0x8 [qlc24B_2 info] Disk registering: Loop id: 0x2 [qlc28B_2 info] Disk registering: Loop id: 0x9 [qlc28B_2 info] Disk registering: Loop id: 0xa [qlc28B_2 info] Disk registering: Loop id: 0xb [qlc28B_2 info] Disk registering: Loop id: 0xc [qlc28B_2 info] Disk registering: Loop id: 0xd [qlc24B_2 info] Disk registering: Loop id: 0x5 [qlc28B_2 info] Disk registering: Loop id: 0xe [qlc28B_2 info] Disk registering: Loop id: 0xf [qlc28B_2 info] Disk registering: Loop id: 0x10 [qlc28B_2 info] Disk registering: Loop id: 0x11 [qlc28B_2 info] Disk registering: Loop id: 0x12 [qlc28B_2 info] Disk registering: Loop id: 0x13 [qlc28B_2 info] Disk registering: Loop id: 0x14 [qlc28B_2 info] Disk registering: Loop id: 0x15 [qlc24B_2 info] Disk registering: Loop id: 0x6 [qlc24B_2 info] Disk registering: Loop id: 0x7 [qlc24B_2 info] Disk registering: Loop id: 0x8 [qlc24B_2 info] Disk registering: Loop id: 0x9 [qlc24B_2 info] Disk registering: Loop id: 0xa [qlc24B_2 info] Disk registering: Loop id: 0xb New VTOC written to disk:
Label : SIMDISK cyl 10938 alt 2 hd 19 sec
80
RPM : 7200 Data cylinders : 10938 Alt cylinders : 2 Physical cylinders : 10940 Heads : 19 Sectors per Track : 80 Number of data blocks :
16625760
Partition Table:
Number Tag Flag Start End Size 2 5 (backup) 1 (unmountable) 0 16625759 16625760 Capturing output to 'install-log.txt'
Image memory limited to 8 G Start at : Sat Mar 15 16:49:47 2008 [system info] Disabling slave processors. [cd25B_2_6 info] Unimplemented SCSI Command: GET CONFIGURATION (SCSI-3) (0x46) [system info] Enabling slave processors. *** Simics getting shaky, switching to 'safe' mode. Simics (main thread) received a segmentation fault. Will try to recuperate. Starting command line. (May have skipped commands in script files.) simics> I appreciate any comments on this. Many thanks!
Ritchie_wang 2008-03-17 |
[← Prev in Thread] | Current Thread | [Next in Thread→] |
---|---|---|
|
Previous by Date: | Re: [Gems-users] Checkpoints creation problem, Berkin Ozisikyilmaz |
---|---|
Next by Date: | [Gems-users] Does this assertion fixed in new GEMS releases?, Xuan Qi |
Previous by Thread: | , (nil) |
Next by Thread: | Re: [Gems-users] Naked checkpoint creation error, Abdullah Kayi |
Indexes: | [Date] [Thread] |