Hi all,
I have successfully compiled Ruby and Opal on an
x86_linux machine. But I meet a error on creating a naked checkpoint.
Followed the setup steps in "Automated Checkpoint
Generation", I changed the OS_NAME and SIMICS_OS_INSTALL_CD_1(2) variables and
adjusted the related paths. However, there is some warnings and errors after I
run "./naked-check-create.sh 16 65536" .
The related software I use is solaris9 and simics
2.2.19.
The simics running information is as
follows:
$ ./naked-check-create.sh 16 65536
number of
boards is 4, number of nodes is 1
+----------------+
Copyright 1998-2005 by Virtutech, All Rights Reserved
|
Virtutech | Version: simics-2.2.19
| Simics |
Compiled: Tue Aug 16 20:22:30 CEST 2005
+----------------+
www.simics.com "Virtutech" and "Simics" are trademarks of
Virtutech AB
Type 'copyright' for details on
copyright.
Type 'license' for details on warranty, copying, etc.
Type
'readme' for further information about this version.
Type 'help help' for
info on the on-line documentation.
Using CD-ROM image file:
/home/user/workspace/scratch/checkpoint_files/sol-9-u7-sparc-v1.iso
setting
media file-cd25B_2_6
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
CRAFF warning: File was not closed cleanly; may be
corrupted
[qlc24B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info]
Disk registering: Loop id: 0xc
[qlc24B_2 info] Disk registering: Loop id:
0xd
[qlc24B_2 info] Disk registering: Loop id: 0xe
[qlc24B_2 info] Disk
registering: Loop id: 0xf
[qlc24B_2 info] Disk registering: Loop id:
0x10
[qlc24B_2 info] Disk registering: Loop id: 0x11
[qlc24B_2 info] Disk
registering: Loop id: 0x12
[qlc24B_2 info] Disk registering: Loop id:
0x13
[qlc24B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk
registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id:
0x4
[qlc28B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk
registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id:
0x6
[qlc28B_2 info] Disk registering: Loop id: 0x7
[qlc28B_2 info] Disk
registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id:
0x2
[qlc28B_2 info] Disk registering: Loop id: 0x9
[qlc28B_2 info] Disk
registering: Loop id: 0xa
[qlc28B_2 info] Disk registering: Loop id:
0xb
[qlc28B_2 info] Disk registering: Loop id: 0xc
[qlc28B_2 info] Disk
registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id:
0x5
[qlc28B_2 info] Disk registering: Loop id: 0xe
[qlc28B_2 info] Disk
registering: Loop id: 0xf
[qlc28B_2 info] Disk registering: Loop id:
0x10
[qlc28B_2 info] Disk registering: Loop id: 0x11
[qlc28B_2 info] Disk
registering: Loop id: 0x12
[qlc28B_2 info] Disk registering: Loop id:
0x13
[qlc28B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk
registering: Loop id: 0x15
[qlc24B_2 info] Disk registering: Loop id:
0x6
[qlc24B_2 info] Disk registering: Loop id: 0x7
[qlc24B_2 info] Disk
registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id:
0x9
[qlc24B_2 info] Disk registering: Loop id: 0xa
[qlc24B_2 info] Disk
registering: Loop id: 0xb
New VTOC written to disk:
Label : SIMDISK cyl 10938 alt 2 hd 19 sec
80
RPM : 7200
Data cylinders :
10938
Alt cylinders : 2
Physical cylinders :
10940
Heads : 19
Sectors per Track : 80
Number of data blocks :
16625760
Partition Table:
Number
Tag
Flag
Start
End Size
2 5 (backup) 1
(unmountable)
0 16625759 16625760
Capturing output to 'install-log.txt'
Image
memory limited to 8 G
Start at : Sat Mar 15 16:49:47 2008
[system info]
Disabling slave processors.
[cd25B_2_6 info] Unimplemented SCSI Command: GET
CONFIGURATION (SCSI-3) (0x46)
[system info] Enabling slave
processors.
*** Simics getting shaky, switching to 'safe'
mode.
Simics (main thread) received a segmentation fault. Will try to
recuperate.
Starting command line. (May have skipped commands in script
files.)
simics>
I appreciate any comments on this.
Many thanks!