Re: [Condor-users] [Globus-discuss] Problem in Job Submission to Condor through GT4

["Natarajan, Senthil" <senthil@xxxxxxxxxxxxx>]

Peter,
Now the problem has been solved.
Thanks lot for your help and I would really appreciate your time and
effort.

All your packages and patches helped globus to submit the correct job
description to the condor. Dan helped me in debugging condor and he also
suggested not using transfer_output_files tag. From the log I found XML
Job description is pointing to a directory, which condor doesn't like it
for some reason.  I fixed that and removed the transfer_output_file tag
now it is working fine.

I am also attaching the working XML Job description.

Once again thanks lot Peter and Dan.

Thanks,
Senthil

-----Original Message-----
From: Peter G Lane [mailto:lane@xxxxxxxxxxx] 
Sent: Thursday, October 13, 2005 7:39 PM
To: Natarajan, Senthil
Cc: discuss@xxxxxxxxxx; Dan Bradley; condor-users@xxxxxxxxxxx
Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
through GT4

On Thu, 2005-10-13 at 19:23 -0400, Natarajan, Senthil wrote:
> Peter,
> 
> Actually even I read about this long back, and thought about it and I
did tried to submit the job by removing (commenting) the
"transfer_output_file" tags, in the morning before sending you mail but
no luck.
> 

I'm out of ideas, then.  If the correct directives are making it into
the Condor job description, then I'm clueless.  I'd need some input from
one of the Condor guys to know if there's anything else missing in our
extensions support.

Peter

> Thanks,
> 
> Senthil
> 
> ________________________________
> 
> From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> Sent: Thu 10/13/2005 5:18 PM
> To: Natarajan, Senthil
> Cc: discuss@xxxxxxxxxx; Dan Bradley; condor-users@xxxxxxxxxxx
> Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
through GT4
> 
> 
> 
> On Thu, 2005-10-13 at 11:49 -0400, Natarajan, Senthil wrote:
> > Peter,
> > I applied the patch and corrected the XML Job description to
> > "transfer_output_files" and changed to absolute path. Then I
submitted
> > the Job.
> > Here is what's happening.
> > 1) It is just a simple shell script job as I attached in the
previous
> > mail, suppose to take  only 30 sec since my argument is 30.
> > 2) But it is running continuously, meaning condor runs this job for
~ 3
> > mins then go back to idle after some ~ 2 or 3 mins it runs the job
until
> > my grid credential proxy expires then globus destroys the job.
> > 3) What's happening is, condor execute the job in an execute machine
in
> > a temp directory say dir_15264 under execute directory and creates
the
> > output file called _condor_stdout_214.0
> > 4) In the Globus XML Job description we mentioned to copy the file
> > /home/senthil/ stdout.j3, I guess Globus informs condor that after
> > finishing the job, copy the output file named
(/home/senthil/stdout.j3)
> > and condor assumes this job will produce this file and keep on
running
> > the job until it sees the output file globus mentioned. So I believe
> > here the problem is the communication gap between Globus and condor.
> > Globus doesn't know what file condor creates, (if we know that we
can
> > specify that file in the job description. ) and condor is not
informing
> > the Globus what file it created.
> > 5) If the job directly submitted to the condor, it know what file it
> > creates and copies that file back to the job submitted machine.
> > Here I am CC this mail to our friend Dan Bradely from Wisconsin
(Condor
> > person) also, hope if he know something he will help us.
> 
> A Google search on "condor transfer_output_files" turned this up:
> 
> "WARNING: Do not specify transfer_output_file in the submit
description
> file unless there is a really good reason - it is best to let Condor
> figure things out by itself based upon what the job."
> 
> This is from the following URL:
> 
> http://www.caenn.wisc.edu/manuals/condor6/5_2Release_Notes.html
> 
> Does it work if you simply remove the transfer_output_files elements?
> 
> Peter
> 
> P.S. to any Condor guys reading this, it looks like there's a typo
> ("transfer_output_file" should be "transfer_output_file"?).
> 
> >
> > Thanks,
> > Senthil
> >
> >
> > Note:
> > Here I am also attaching the condor.pm and the logfile dump.
> >
> >
> > -----Original Message-----
> > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > Sent: Wednesday, October 12, 2005 3:26 PM
> > To: Natarajan, Senthil
> > Cc: discuss@xxxxxxxxxx; condor-users@xxxxxxxxxxx
> > Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
> > through GT4
> >
> > Attached is a patch for your condor.pm.  There is also a new update
> > package for anyone else who's following along.  You should change
> > "transfer_output_file" to "transfer_output_files" in your XML job
> > description.  Also, mine hung on Pending (condor_q listed the two
jobs
> > with status 'I') unless I made the transfer_output_files values
absolute
> > paths.
> >
> > Peter
> >
> > On Wed, 2005-10-12 at 12:37 -0600, Peter G Lane wrote:
> > > On Wed, 2005-10-12 at 10:20 -0400, Natarajan, Senthil wrote:
> > > > Peter,
> > > > I ran ./setup-globus-job-manager-condor, it updated the
condor.pm.
> > > > But still the output file is not copied back to the submitted
> > machine.
> > >
> > > The directives are definitely making it into your condor job
> > > description.  I even dumped the condor job description myself
right
> > > before it's submitted and verified this.
> > >
> > > Now then, I went back and read the condor documentation and it
looks
> > > like there is a typo in what I was given for one of the directive
> > names:
> > >
> > > http://bugzilla.globus.org/bugzilla/show_bug.cgi?id=3773#c1
> > >
> > > It looks like it should be "transfer_output_files" not
> > > "transfer_output_file".  I'm not sure why Condor doesn't complain
> > about
> > > this, though.  It seems like it'd be a good idea.  Anyway, I'll
fix
> > this
> > > and give you a patch rather than making you download a new update
> > > package (although I'll obviously make one).
> > >
> > > >
> > > > I was wondering is this problem is happening only with GT4, or
even
> > the
> > > > older version of Globus has it.
> > >
> > > Considering these are the exact same Perl modules sans GT4
updates,
> > GT2
> > > shouldn't have been able to do this without hacking the condor.pm
> > > either.
> > >
> > > >  Then how the people are really
> > > > submitting the Jobs to Globus to run on Condor pool?
> > >
> > > Either they aren't staging anything or the nodes of the pool share
a
> > > file system with the node that GRAM is installed on.
> > >
> > > > Is that I am the only person having this problem?
> > >
> > > No, but others have opted for just hacking the condor.pm like you
did.
> > >
> > > > Is there any way we can get this done, all I am trying is I have
a
> > > > simple shell script it sleeps and prints counter value in the
output
> > > > file. I want that output file copied back, from the executing
> > machine to
> > > > job submitted machine.(condor does this if I directly submit to
> > condor
> > > > pool but not through Globus)
> > >
> > > I apologize that this is taking so long.  I hope I made it clear
that
> > > this is development code.  I think we're one step away from
getting
> > this
> > > to work, though.  I appreciate you hanging in there.
Unfortunately
> > all
> > > our Condor installations have shared file systems, so it's hard
for us
> > > to test this sort of thing without wonderful people like you. :)
> > >
> > > >
> > > > Here I am attaching the
> > > > 1) condor.pm.
> > > > 2) Shell Script (My test job)
> > > > 3) XML Job description
> > > > 4) logfile dump
> > > > 5) condor job description file (analogous to the Globus XML Job
> > > > description)
> > > > 6) output file got when I ran the same job by directly
submitting to
> > the
> > > > condor pool.
> > > >
> > > > Could any one please help me on this.
> > > > Thanks,
> > > > Senthil
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > Sent: Tuesday, October 11, 2005 6:13 PM
> > > > To: Natarajan, Senthil
> > > > Cc: discuss@xxxxxxxxxx
> > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
Condor
> > > > through GT4
> > > >
> > > > On Tue, 2005-10-11 at 17:18 -0400, Natarajan, Senthil wrote:
> > > > > Peter,
> > > > > Any way I rebuild all the 4 packages with the force option but
> > still
> > > > > having the same problem. I noticed (update time) the
> > > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm was
not
> > > > > modified by any of these package rebuild still showing the old
> > date
> > > > and
> > > > > time.
> > > >
> > > > I looked over the post install instructions that I gave you and
> > noticed
> > > > I block copied the wrong setup script from my directory listing,
> > sorry
> > > > about that.  It should have been
setup-globus-job-manager-condor.
> > > > Here's a dump of what I just did to verify that the condor.pm
was
> > being
> > > > updated:
> > > >
> > > > % ls -l
$GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > -rw-r--r--  1 lane lane 17K Oct 10
> > > > 12:05
> > > >
> >
/usr/local/globus/globus-4.0.1/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > % cd $GLOBUS_LOCATION/setup/globus/
> > > > % ./setup-globus-job-manager-condor
> > > > checking for condor_submit...
/opt/condor-6.7.6/bin/condor_submit
> > > > checking for condor_rm... /opt/condor-6.7.6/bin/condor_rm
> > > > find-condor-tools: creating ./config.status
> > > > config.status: creating condor.pm
> > > > config.status: creating globus-condor-print-config
> > > > % ls -l
$GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > -rw-r--r--  1 lane lane 17K Oct 11
> > > > 16:06
> > > >
> >
/usr/local/globus/globus-4.0.1/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > >
> > > > Peter
> > > >
> > > > >
> > > > > Please find the attached condor.pm (after all 4 packages
forceful
> > > > > rebuild) and the logfile dump.
> > > > >
> > > > > Here is package build.
> > > > >
> > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > globus_wsrf_gram_service_java-0.78.tar.gz gcc32dbg
> > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > globus_wsrf_gram_service_java
> > > > > gpt-build ====> Changing to
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > a-0.78.0/
> > > > > gpt-build ====> BUILDING globus_wsrf_gram_service_java
> > > > > gpt-build ====> Changing to
> > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_wsrf_gram_service_java-noflavor-dev
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_wsrf_gram_service_java-noflavor-rtl
> > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > globus_scheduler_event_generator-1.0.tar.gz gcc32dbg
> > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > globus_scheduler_event_generator
> > > > > gpt-build ====> Changing to
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > ator-1.0/
> > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > gpt-build ====> Changing to
> > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_scheduler_event_generator-gcc32dbg-pgm_static
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_scheduler_event_generator-noflavor-data
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_scheduler_event_generator-noflavor-doc
> > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > globus_gram_job_manager-7.7.tar.gz gcc32dbg
> > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > globus_gram_job_manager
> > > > > gpt-build ====> Changing to
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager-7.7/
> > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > gpt-build ====> Changing to
> > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager-gcc32dbg-dev
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager-gcc32dbg-pgm_static
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager-gcc32dbg-rtl
> > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > globus_gram_job_manager_setup_condor-2.9.tar.gz gcc32dbg
> > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > globus_gram_job_manager_setup_condor
> > > > > gpt-build ====> Changing to
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > p_condor-2.9/
> > > > > gpt-build ====> BUILDING globus_gram_job_manager_setup_condor
> > > > > gpt-build ====> Changing to
> > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager_setup_condor-noflavor-data
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager_setup_condor-noflavor-dev
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager_setup_condor-noflavor-doc
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager_setup_condor-noflavor-pgm_static
> > > > > gpt-build ====> REMOVING empty package
> > > > > globus_gram_job_manager_setup_condor-noflavor-rtl
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > Sent: Tuesday, October 11, 2005 3:34 PM
> > > > > To: Natarajan, Senthil
> > > > > Cc: discuss@xxxxxxxxxx
> > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
Condor
> > > > > through GT4
> > > > >
> > > > > I think the other ones are good.  The extension handler seems
to
> > > > working
> > > > > appropriately.  All you need is the
> > > > > globus_gram_job_manager_setup_condor-2.9 package to interpret
the
> > > > values
> > > > > that the extension handler is setting up for you.
> > > > >
> > > > > Peter
> > > > >
> > > > > On Tue, 2005-10-11 at 14:39 -0400, Natarajan, Senthil wrote:
> > > > > > Peter,
> > > > > > You mean to install those 4 packages only right with the
--force
> > > > > option?
> > > > > > Thanks,
> > > > > > Senthil
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > Sent: Tuesday, October 11, 2005 2:36 PM
> > > > > > To: Natarajan, Senthil
> > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> > Condor
> > > > > > through GT4
> > > > > >
> > > > > > Yeah, as I expected the code to put those directives in the
> > condor
> > > > job
> > > > > > description are missing.  I also see your custom additions,
so
> > you
> > > > > > probably just need to force a rebuild.  Try gpt-build again
with
> > the
> > > > > > --force option followed by the instructions I gave you last
time
> > for
> > > > > > redoing the post install steps.  If that still doesn't work,
> > capture
> > > > > > your session trying to build it and send it back to the
list.
> > For
> > > > > some
> > > > > > reason that condor update package isn't being installed.
> > > > > >
> > > > > > Peter
> > > > > >
> > > > > > On Tue, 2005-10-11 at 09:34 -0400, Natarajan, Senthil wrote:
> > > > > > > Peter,
> > > > > > > Here I attached the condor.pm.
> > > > > > > I just followed your instruction to install those 4
packages
> > > > > > > (using gpt-build). Please let me know whether it has been
> > properly
> > > > > > > installed or what needs to be done.
> > > > > > > Thanks,
> > > > > > > Senthil
> > > > > > >
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > Sent: Monday, October 10, 2005 4:22 PM
> > > > > > > To: Natarajan, Senthil
> > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> > Condor
> > > > > > > through GT4
> > > > > > >
> > > > > > > On Mon, 2005-10-10 at 15:26 -0400, Natarajan, Senthil
wrote:
> > > > > > > > Peter,
> > > > > > > > I ran. /setup-globus-scheduler-provider-condor
> > > > > > > > Then I corrected the typo WhenToTransferFiles to
> > > > > > WhenToTransferOutput.
> > > > > > > > Then I submitted the job, but still it is not copying
the
> > output
> > > > > > file
> > > > > > > > back to the submitted machine. I guess since condor is
> > running
> > > > the
> > > > > > job
> > > > > > > > in some tmp execute directory in some other machine,
globus
> > > > don't
> > > > > > know
> > > > > > > > about that (some kind of communication is missing
between
> > condor
> > > > > and
> > > > > > > > globus) machine and directory, so it is not copying
back.
> > > > > > > >
> > > > > > > > When you tried did your job ran in your job submitted
> > machine
> > > > > itself
> > > > > > > or
> > > > > > > > in other machine?
> > > > > > >
> > > > > > > I only have a local, single-machine installation of Condor
> > that I
> > > > > test
> > > > > > > with.  All I do is make sure the correct directives are in
the
> > > > > Condor
> > > > > > > job description.  If I can verify that the directives are
> > being
> > > > > > appended
> > > > > > > and it doesn't work, then it's a Condor issue.  I know the
> > > > > directives
> > > > > > > are being written because Condor complains if I submit
your
> > job
> > > > > > > description with the typo (i.e. it complains that it has
> > > > > > > should_transfer_files but not WhenToTransferOutput.
Fixing
> > the
> > > > typo
> > > > > > > prevents Condor from complaining).
> > > > > > >
> > > > > > > >
> > > > > > > > With out running the
setup-globus-scheduler-provider-condor
> > and
> > > > > > > > modifying WhenToTransferFiles  to WhenToTransferOutput,
I
> > ran
> > > > the
> > > > > > job
> > > > > > > on
> > > > > > > > Friday , It was copying the file back if the job is
running
> > in
> > > > the
> > > > > > > same
> > > > > > > > machine as the job submitted machine.
> > > > > > > >
> > > > > > > > I was curious did you test on the same machine (job
> > submission
> > > > and
> > > > > > > > execution in the same machine) or you submitted the job
in
> > one
> > > > > > machine
> > > > > > > > and it ran on different machine?
> > > > > > > >
> > > > > > > > Please let me know.
> > > > > > > > Here I am again attaching the logfile dump and the XML
Job
> > > > > > > description.
> > > > > > > > Thanks,
> > > > > > > > Senthil
> > > > > > > >
> > > > > > > >
> > > > > > > > Note:
> > > > > > > > In order to run the condor job, I added these lines. In
> > > > > > > >
$GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > (in
> > > > > line
> > > > > > > > 280)
> > > > > > > >
> > > > > > > > print SCRIPT_FILE "should_transfer_files = IF_NEEDED\n";
> > > > > > > > print SCRIPT_FILE "WhenToTransferOutput = ON_EXIT\n";
> > > > > > > > print SCRIPT_FILE "transfer_files = ONEXIT\n";
> > > > > > >
> > > > > > > Like I said before, this is exactly what I add if the
updated
> > > > condor
> > > > > > > package is installed properly.  Can you send me the
following
> > > > file:
> > > > > > >
> > > > > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > >
> > > > > > > I really don't think the updated condor.pm got installed.
> > > > > Everything
> > > > > > > else looks fine.  I'm just not seeing output from the
> > condor.pm
> > > > > module
> > > > > > > that indicates that it is putting these lines in the
Condor
> > job
> > > > > > > description.  You should be seeing something likes this:
> > > > > > >
> > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Using jm supplied job
> > > > > > > dir:
/home/lane/.globus/3cf6d2c0-39ba-11da-99c3-9071bceca9ea
> > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > "should_transfer_files
> > > > =
> > > > > > YES"
> > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > "WhenToTransferOutput =
> > > > > > > ON_EXIT"
> > > > > > >  Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > "transfer_output_file
> > > > =
> > > > > > > stdout.j3, stderr.j3"  Mon Oct 10 12:18:22 2005 JM_SCRIPT:
> > About
> > > > to
> > > > > > > submit condor job
> > > > > > >
> > > > > > > That's straight out of my logfile after I installed the
same
> > > > package
> > > > > > > that is on the web site and ran your corrected job
> > description.
> > > > > > >
> > > > > > > Peter
> > > > > > >
> > > > > > > >
> > > > > > > > If I remove these line still the jobs are not
running.(i.e.
> > it
> > > > is
> > > > > > not
> > > > > > > > finding the HasTranferFile attribute in the requirement
> > > > > expression)
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > Sent: Monday, October 10, 2005 2:21 PM
> > > > > > > > To: Natarajan, Senthil
> > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission
to
> > > > Condor
> > > > > > > > through GT4
> > > > > > > >
> > > > > > > > I think the problem is that I neglected to tell you to
> > re-run
> > > > gpt-
> > > > > > > > postinstall with the --force option.  You should also be
> > able to
> > > > > cd
> > > > > > to
> > > > > > > > $GLOBUS_LOCATION/setup/globus and run
> > './setup-globus-scheduler-
> > > > > > > > provider-condor'.  The later is much quicker.
> > > > > > > >
> > > > > > > > Also, WhenToTransferFiles should be
WhenToTransferOutput.
> > > > Fixing
> > > > > > this
> > > > > > > > typo in your job description and changing it for my
system
> > ran
> > > > > just
> > > > > > > fine
> > > > > > > > for me.
> > > > > > > >
> > > > > > > > Peter
> > > > > > > >
> > > > > > > > On Mon, 2005-10-10 at 13:08 -0400, Natarajan, Senthil
wrote:
> > > > > > > > > Peter,
> > > > > > > > > Here I attached the logfile dump and my XML job
> > description.
> > > > > > > > > Still it is not copying the output file back to the
job
> > > > > submitted
> > > > > > > > > machine if the job runs on different machine. But if
the
> > job
> > > > > runs
> > > > > > on
> > > > > > > > the
> > > > > > > > > same machine it copies the output file.
> > > > > > > > > Please let me know.
> > > > > > > > >
> > > > > > > > > Sorry, I couldn't get back to you. Actually I was out
for
> > more
> > > > > > than
> > > > > > > > > couple of days to attend the Grid Conference in
Boston; I
> > did
> > > > > meet
> > > > > > > > your
> > > > > > > > > colleagues.
> > > > > > > > > Thanks,
> > > > > > > > > Senthil
> > > > > > > > >
> > > > > > > > > 
> > > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > Sent: Thursday, September 29, 2005 3:53 PM
> > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
Submission to
> > > > > Condor
> > > > > > > > > through GT4
> > > > > > > > >
> > > > > > > > > On Thu, 2005-09-29 at 14:26 -0400, Natarajan, Senthil
> > wrote:
> > > > > > > > > > Peter,
> > > > > > > > > > I changed the
> > > > > > > > >
$GLOBUS_LOCATION/lib/perl/Globus/GRAM/ExtensionsHandler.pm
> > > > > > > > > > file according to your suggestion and I didn't get
that
> > > > parser
> > > > > > > > error.
> > > > > > > > > I
> > > > > > > > > > submitted the job the job successfully executed but
it
> > > > didn't
> > > > > > copy
> > > > > > > > the
> > > > > > > > > > output file back to the submitted machine (i.e our
main
> > > > > problem
> > > > > > > and
> > > > > > > > we
> > > > > > > > > > are working on to solve that).
> > > > > > > > > >
> > > > > > > > > > I am pretty sure that what ever we are specifying
under
> > the
> > > > > > > > extensions
> > > > > > > > > > tag, globus is not recognizing it or it is not doing
> > > > anything
> > > > > > with
> > > > > > > > > that.
> > > > > > > > > > Because....
> > > > > > > > > >
> > > > > > > > > > i) Initially I had problem in executing the job
itself,
> > > > (i.e.)
> > > > > > as
> > > > > > > > soon
> > > > > > > > > > as I submitted the job to globus, globus in turn
submits
> > the
> > > > > job
> > > > > > > to
> > > > > > > > > the
> > > > > > > > > > condor pool. And the jobs are idle and not running
bcos
> > of
> > > > the
> > > > > > job
> > > > > > > > > > requirement.
> > > > > > > > > > Requirements = (OpSys == "LINUX" && Arch == "INTEL")
&&
> > > > (Disk
> > > > > >=
> > > > > > > > > > DiskUsage) && ((Memory * 1024) >= ImageSize) &&
> > > > > > > > > (TARGET.FileSystemDomain
> > > > > > > > > > == MY.FileSystemDomain)
> > > > > > > > > > The problem here is, there is no HasFileTransfer
option
> > in
> > > > the
> > > > > > > > > > requirement expression. In order to fix this I added
the
> > > > > > following
> > > > > > > > two
> > > > > > > > > > lines in the file
> > > > > > > > > >
> > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > > > > > print SCRIPT_FILE "should_transfer_files =
IF_NEEDED\n";
> > > > > > > > > > print SCRIPT_FILE "WhenToTransferOutput =
ON_EXIT\n";
> > > > > > > > > > This fixed the job execution problem, but not
copying
> > the
> > > > file
> > > > > > > back
> > > > > > > > to
> > > > > > > > > > the submitted machine.
> > > > > > > > >
> > > > > > > > > This is exactly what I added to the Condor job
description
> > > > based
> > > > > > on
> > > > > > > > the
> > > > > > > > > extensions.  What you can do is add an extension
element
> > > > before
> > > > > > all
> > > > > > > > the
> > > > > > > > > other extension elements to write a log file which
dumps
> > some
> > > > > > useful
> > > > > > > > > debugging info:
> > > > > > > > >
> > > > > > > > > <extensions>
> > > > > > > > >         <logfile>/home/me/logfile</logfile>
> > > > > > > > >         . . .
> > > > > > > > > </extensions>
> > > > > > > > >
> > > > > > > > > If the packages are installed properly, you should see
> > lines
> > > > > like
> > > > > > > the
> > > > > > > > > following in this log file:
> > > > > > > > >
> > > > > > > > > Wed Sep 28 13:52:53 2005 JM_SCRIPT: Adding
> > > > > "should_transfer_files
> > > > > > =
> > > > > > > > > ALWAYS"
> > > > > > > > >
> > > > > > > > > Wed Sep 28 13:52:53 2005 JM_SCRIPT: Adding
> > > > "WhenToTransferOutput
> > > > > =
> > > > > > > > > ON_EXIT"
> > > > > > > > >
> > > > > > > > > Also, I don't see you specifying any
transfer_input_file
> > or
> > > > > > > > > transfer_output_file extension elements.  You need
those
> > to
> > > > > > specify
> > > > > > > > > which files to transfer to or from the compute node.
GRAM
> > > > will
> > > > > > not
> > > > > > > > set
> > > > > > > > > those up for you automatically.
> > > > > > > > >
> > > > > > > > > Peter
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > ii) I submitted the problem; from here we are
working to
> > > > solve
> > > > > > > this
> > > > > > > > > > problem.
> > > > > > > > > >
> > > > > > > > > > iii) Now I commented out the above two lines which I
> > added
> > > > in
> > > > > > > > > condor.pm.
> > > > > > > > > > I submitted the XML Job description has the
extensions
> > tag
> > > > > with
> > > > > > > the
> > > > > > > > > > options condor:should_transfer_files = YES and
> > > > > > > > > > condor:WhenToTransferOutput = ON_EXIT. Now I back to
> > stage
> > > > > one,
> > > > > > > that
> > > > > > > > > is
> > > > > > > > > > the jobs are not running and idle bcos of the
> > requirement
> > > > > > problem,
> > > > > > > > it
> > > > > > > > > > doesn't have the file transfer option even though we
> > > > specified
> > > > > > in
> > > > > > > > the
> > > > > > > > > > job description.
> > > > > > > > > >
> > > > > > > > > > In conclusion, some thing is overriding the
extensions
> > tag
> > > > or
> > > > > > the
> > > > > > > > > > scripts like condor.pm are not understanding the
> > extensions
> > > > > > part.
> > > > > > > > > > So after updating all these 4 packages, we are
having
> > the
> > > > same
> > > > > > > > > problem.
> > > > > > > > > >
> > > > > > > > > > Please help me on this, I am at University Of
> > Pittsburgh,
> > > > you
> > > > > > can
> > > > > > > > > reach
> > > > > > > > > > me at 412-624-6578.
> > > > > > > > > >
> > > > > > > > > > Thanks,
> > > > > > > > > > Senthil
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > Sent: Wednesday, September 28, 2005 2:48 PM
> > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
Submission
> > to
> > > > > > Condor
> > > > > > > > > > through GT4
> > > > > > > > > >
> > > > > > > > > > On Wed, 2005-09-28 at 14:04 -0400, Natarajan,
Senthil
> > wrote:
> > > > > > > > > > > Peter,
> > > > > > > > > > > Thanks lot and I appreciate your help.
> > > > > > > > > > > I successfully installed those packages. I am
trying
> > to
> > > > > > execute
> > > > > > > > the
> > > > > > > > > > XML
> > > > > > > > > >
> > > > > > > > > > Excellent!
> > > > > > > > > >
> > > > > > > > > > > Job description with the new extension tags(
> > > > > > > > > > > condor:should_transfer_files ,
> > condor:transfer_output_file
> > > > > > etc)
> > > > > > > > Now
> > > > > > > > > > the
> > > > > > > > > > > globus parser is not recognizing these new tags
its
> > giving
> > > > > > > parser
> > > > > > > > > > error.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Looks like we need to include the Namespace of
where
> > these
> > > > > new
> > > > > > > > tags
> > > > > > > > > > are
> > > > > > > > > > > located. Did you include any additional namespace
> > while
> > > > > > testing?
> > > > > > > > > >
> > > > > > > > > > Interesting.  My parser seems to be more lenient.
This
> > > > should
> > > > > > be
> > > > > > > a
> > > > > > > > > > simple matter to fix, though (famous last words, I
> > know).
> > > > If
> > > > > > you
> > > > > > > > edit
> > > > > > > > > > the
> > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/ExtensionsHandler.pm
> > > > > > > file
> > > > > > > > > and
> > > > > > > > > > search "new XML::Parser", you should be able to add
a
> > hash
> > > > > > > parameter
> > > > > > > > > to
> > > > > > > > > > turn off namespace processing.  Change the
following:
> > > > > > > > > >
> > > > > > > > > > my $extParser = new XML::Parser(Handlers => {
> > > > > > > > > >             Start       => sub {
$self->StartTag(@_); },
> > > > > > > > > >             End         => sub { $self->EndTag(@_);
},
> > > > > > > > > >             Char        => sub { $self->Char(@_); }
});
> > > > > > > > > >
> > > > > > > > > > to this:
> > > > > > > > > >
> > > > > > > > > > my $extParser = new XML::Parser(
> > > > > > > > > >       Namespaces => 0,
> > > > > > > > > >       Handlers => {
> > > > > > > > > >             Start       => sub {
$self->StartTag(@_); },
> > > > > > > > > >             End         => sub { $self->EndTag(@_);
},
> > > > > > > > > >             Char        => sub { $self->Char(@_); }
});
> > > > > > > > > >
> > > > > > > > > > Either that or just put a bogus xmlns attribute in
the
> > > > > > extensions
> > > > > > > > > start
> > > > > > > > > > tag:
> > > > > > > > > >
> > > > > > > > > > <extensions xmlns:condor="bogus_condor_namespace">
> > > > > > > > > >       <condor:should_transfer_files>...
> > > > > > > > > >       . . .
> > > > > > > > > > </extensions>
> > > > > > > > > >
> > > > > > > > > > Let me know how it goes.
> > > > > > > > > >
> > > > > > > > > > Peter
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Here I am pasting the error and the XML Job
> > description.
> > > > > > > > > > >
> > > > > > > > > > > [senthil@gis14 GridTest]$ globusrun-ws -submit -F
> > hostname
> > > > > -f
> > > > > > > > > > > multi_condor_test1.xml
> > > > > > > > > > > globusrun-ws: Error loading rsl
> > > > > > > > > > > globus_soap_message_module: Deserialization of
> > > > > > > > > > > {http://www.w3.org/2001/XMLSchema}string failed.
> > > > > > > > > > > globus_soap_message_module: XML parser failed to
get
> > the
> > > > > next
> > > > > > > node
> > > > > > > > > in
> > > > > > > > > > > the message
> > > > > > > > > > > globus_soap_message_module: Parser Failed
Namespace
> > prefix
> > > > > > > condor
> > > > > > > > on
> > > > > > > > > > > should_transfer_files is not defined
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > <?xml version="1.0" encoding="UTF-8"?>
> > > > > > > > > > > <multiJob
> > > > > > > > > >
> > > > xmlns:gram="http://www.globus.org/namespaces/2004/10/gram/job";
> > > > > > > > > > >
> > > > > > >
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/03/addressing";>
> > > > > > > > > > >     <factoryEndpoint>
> > > > > > > > > > >         <wsa:Address>
> > > > > > > > > > >
> > > > > > > > > >
> > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > >         </wsa:Address>
> > > > > > > > > > >         <wsa:ReferenceProperties>
> > > > > > > > > > >
<gram:ResourceID>Multi</gram:ResourceID>
> > > > > > > > > > >         </wsa:ReferenceProperties>
> > > > > > > > > > >     </factoryEndpoint>
> > > > > > > > > > >     <directory>${GLOBUS_LOCATION}</directory>
> > > > > > > > > > >     <count>1</count>
> > > > > > > > > > >
> > > > > > > > > > >     <job>
> > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > 
> > > > > > > > > > >
> > > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > >
> > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > >
> > > > > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > >         <argument>60</argument>
> > > > > > > > > > >
<stdout>${GLOBUS_USER_HOME}/stdout.j3</stdout>
> > > > > > > > > > >
<stderr>${GLOBUS_USER_HOME}/stderr.j3</stderr>
> > > > > > > > > > >         <count>1</count>
> > > > > > > > > > >         <extensions>
> > > > > > > > > > > 
> > > > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > >
> >
<condor:should_transfer_files>IF_NEEDED</condor:should_transfer_files>
> > > > > > > > > > >
> > > > > > > > > >
> > > > >
<condor:WhenToTransferFiles>ON_EXIT</condor:WhenToTransferFiles>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
<condor:transfer_output_file>${GLOBUS_USER_HOME}/stdout.j3</condor:trans
> > > > > > > > > > > fer_output_file>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
<condor:transfer_output_file>${GLOBUS_USER_HOME}/stderr.j3</condor:trans
> > > > > > > > > > > fer_output_file>
> > > > > > > > > > >     </extensions>
> > > > > > > > > > >   </job>
> > > > > > > > > > >
> > > > > > > > > > > <job>
> > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > 
> > > > > > > > > > >
> > > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > >
> > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > >
> > > > > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > >         <argument>120</argument>
> > > > > > > > > > >
<stdout>${GLOBUS_USER_HOME}/stdout.j4</stdout>
> > > > > > > > > > >
<stderr>${GLOBUS_USER_HOME}/stderr.j4</stderr>
> > > > > > > > > > >         <count>1</count>
> > > > > > > > > > >     </job>
> > > > > > > > > > >
> > > > > > > > > > > </multiJob>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > Sent: Wednesday, September 28, 2005 12:05 PM
> > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > Submission to
> > > > > > > Condor
> > > > > > > > > > > through GT4
> > > > > > > > > > >
> > > > > > > > > > > On Wed, 2005-09-28 at 11:36 -0400, Natarajan,
Senthil
> > > > wrote:
> > > > > > > > > > > > Peter,
> > > > > > > > > > > > I tried with different combinations the package
> > > > > > > > > > > > globus_wsrf_gram_service_java-0.78.0 went
through.
> > > > > > > > > > > >
> > > > > > > > > > > > But still other packages are giving problem; the
> > problem
> > > > > is
> > > > > > it
> > > > > > > > > > > couldn't
> > > > > > > > > > > > find the file Doxyfile.in under the directory
> > doxygen.
> > > > > > > > (Physically
> > > > > > > > > I
> > > > > > > > > > > > couldn't find the file in that directory). Could
you
> > > > > please
> > > > > > > help
> > > > > > > > > me
> > > > > > > > > > on
> > > > > > > > > > > > this, I am kind of stuck.
> > > > > > > > > > >
> > > > > > > > > > > Yeah, this is my fault.  I wasn't creating source
> > packages
> > > > > > > > > correctly.
> > > > > > > > > > I
> > > > > > > > > > > talked to the GPT gurus and created a new set of
> > source
> > > > > > packages
> > > > > > > > > that
> > > > > > > > > > > should work.  I refreshed the downloads page so
you
> > should
> > > > > see
> > > > > > > the
> > > > > > > > > > > section in question dated September 28.  Try those
> > > > packages.
> > > > > > > > Again,
> > > > > > > > > > > sorry for the inconvenience.  It's a learning
process
> > for
> > > > me
> > > > > > > too.
> > > > > > > > :)
> > > > > > > > > > >
> > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > > > Thanks,
> > > > > > > > > > > > Senthil
> > > > > > > > > > > >
> > > > > > > > > > > > Here is the error msg.
> > > > > > > > > > > >
> > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > >
globus_scheduler_event_generator-1.0.1-src.tar.gz
> > > > gcc32dbg
> > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > > globus_scheduler_event_generator
> > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > ator-1.0.1/
> > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > >
> > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > export
> > > > > > > > > > > > GLOBUS_LOCATION;  CPP='/usr/bin/gcc -E'; export
CPP;
> > > > > > > CPPFLAGS='
> > > > > > > > > > > > -I/usr/local/GridComputing/globus-4.0.1/include
> > > > > > > > > > > >
> > > > -I/usr/local/GridComputing/globus-4.0.1/include/gcc32dbg';
> > > > > > > > export
> > > > > > > > > > > > CPPFLAGS; CFLAGS='-g   -Wall'; export CFLAGS;
> > LDFLAGS='
> > > > > > > > > > > > -L/usr/local/GridComputing/globus-4.0.1/lib';
export
> > > > > > LDFLAGS;
> > > > > > > > > > > > CXX='/usr/bin/g++'; export CXX;
CXXCPP='/usr/bin/g++
> > > > -E';
> > > > > > > export
> > > > > > > > > > > CXXCPP;
> > > > > > > > > > > > CXXFLAGS='-g  '; export CXXFLAGS;
> > F77='/usr/bin/g77';
> > > > > export
> > > > > > > > F77;
> > > > > > > > > > > > AR='/usr/bin/ar'; export AR; ARFLAGS='ruv';
export
> > > > > ARFLAGS;
> > > > > > > > > > > > RANLIB='/usr/bin/ranlib'; export RANLIB;
> > NM='/usr/bin/nm
> > > > > > -B';
> > > > > > > > > export
> > > > > > > > > > > NM;
> > > > > > > > > > > > CC='/usr/bin/gcc'; export CC;
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > ator-1.0.1//configure  --with-flavor=gcc32dbg
> > > > > > > > > > > > checking whether to enable maintainer-specific
> > portions
> > > > of
> > > > > > > > > > > Makefiles...
> > > > > > > > > > > > no
> > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > checking for a BSD-compatible install...
> > > > /usr/bin/install
> > > > > -c
> > > > > > > > > > > > checking whether build environment is sane...
yes
> > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > config.status: creating pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > config.status: creating doxygen/Makefile
> > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > globus_gram_job_manager-7.6.2-src.tar.gz
gcc32dbg
> > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > globus_gram_job_manager
> > > > > > > > > > > > ERROR: The following packages are missing
> > > > > > > > > > > > Package globus_gram_job_manager-ANY-src is
missing
> > > > > > > > > > > >
pgm_link-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > > Package globus_gram_job_manager-ANY-src is
missing
> > > > > > > > > > > > compile-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > >
> > > > > > > > > > > > Died at
> > > > > /usr/local/GridComputing/software/GPT/sbin/gpt-build
> > > > > > > > line
> > > > > > > > > > 362,
> > > > > > > > > > > > <FILE> line 104566.
> > > > > > > > > > > >
> > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > >
> > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > gcc32dbg
> > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > >
> > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > export
> > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > checking whether to enable maintainer-specific
> > portions
> > > > of
> > > > > > > > > > > Makefiles...
> > > > > > > > > > > > no
> > > > > > > > > > > > Warning: package doesn't build with flavors
ignored
> > > > > > > > > > > > Warning:  ignored
> > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > checking for a BSD-compatible install...
> > > > /usr/bin/install
> > > > > -c
> > > > > > > > > > > > checking whether build environment is sane...
yes
> > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > config.status: creating pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > 
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > Sent: Tuesday, September 27, 2005 6:38 PM
> > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > Submission
> > > > to
> > > > > > > > Condor
> > > > > > > > > > > > through GT4
> > > > > > > > > > > >
> > > > > > > > > > > > I believe I fixed the
> > > > globus_wsrf_gram_service_java-0.78.0
> > > > > > > > package
> > > > > > > > > > > > (replaced the package).  I'm still trying to
work
> > with
> > > > the
> > > > > > GPT
> > > > > > > > > > experts
> > > > > > > > > > > > to figure out why the scheduler_event_generator
> > package
> > > > > > isn't
> > > > > > > > > > > > relocatable.
> > > > > > > > > > > >
> > > > > > > > > > > > Peter
> > > > > > > > > > > >
> > > > > > > > > > > > On Tue, 2005-09-27 at 16:01 -0400, Natarajan,
> > Senthil
> > > > > wrote:
> > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > I am trying to install the packages in the
> > following
> > > > > order
> > > > > > > > > > > > > globus_wsrf_gram_service_java-0.78.0
> > > > > > > > > > > > > globus_scheduler_event_generator-1.0.1
> > > > > > > > > > > > > before going for the main packages. But I am
> > getting
> > > > the
> > > > > > > > > following
> > > > > > > > > > > > > error.
> > > > > > > > > > > > > Please let me know am I trying correctly.
> > > > > > > > > > > > >
> > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > >
globus_wsrf_gram_service_java-0.78.0-src.tar.gz
> > > > gcc32dbg
> > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
FOR
> > > > > > > > > > > > > globus_wsrf_gram_service_java
> > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/
> > > > > > > > > > > > > gpt-build ====> BUILDING
> > globus_wsrf_gram_service_java
> > > > > > > > > > > > >  ant
> > > > > > > >
-Denv.GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1
> > > > > > > > > > > > > Buildfile: build.xml
> > > > > > > > > > > > >   [taskdef] Could not load definitions from
> > resource
> > > > > > > > > clovertasks.
> > > > > > > > > > It
> > > > > > > > > > > > > could not be found.
> > > > > > > > > > > > >
> > > > > > > > > > > > > initClover:
> > > > > > > > > > > > >
> > > > > > > > > > > > > init:
> > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/build
> > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/build/classes
> > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/build/lib
> > > > > > > > > > > > >
> > > > > > > > > > > > > compile:
> > > > > > > > > > > > >     [javac] Compiling 36 source files to
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/build/classes
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
a-0.78.0/src/org/globus/exec/service/job/ManagedJobResourceImpl.java:259
> > > > > > > > > > > > > : warning: non-varargs call of varargs method
with
> > > > > inexact
> > > > > > > > > > argument
> > > > > > > > > > > > type
> > > > > > > > > > > > > for last parameter;
> > > > > > > > > > > > >     [javac] cast to java.lang.Object for a
varargs
> > > > call
> > > > > > > > > > > > >     [javac] cast to java.lang.Object[] for a
> > > > non-varargs
> > > > > > > call
> > > > > > > > > and
> > > > > > > > > > to
> > > > > > > > > > > > > suppress this warning
> > > > > > > > > > > > >     [javac]                 value =
> > > > > > > > > > readMethod.invoke(resourceData,
> > > > > > > > > > > > > null);
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > ^
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > 385: warning: non-varargs call of varargs
method
> > with
> > > > > > > inexact
> > > > > > > > > > > argument
> > > > > > > > > > > > > type for last parameter;
> > > > > > > > > > > > >     [javac] cast to java.lang.Object for a
varargs
> > > > call
> > > > > > > > > > > > >     [javac] cast to java.lang.Object[] for a
> > > > non-varargs
> > > > > > > call
> > > > > > > > > and
> > > > > > > > > > to
> > > > > > > > > > > > > suppress this warning
> > > > > > > > > > > > >     [javac]
> > > > > > > subJobDescriptions[index],
> > > > > > > > > > > null);
> > > > > > > > > > > > >     [javac]
> > > > > > > > ^
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > 697: cannot find symbol
> > > > > > > > > > > > >     [javac] symbol  : variable
> > > > SUBJOB_UNSUBSCRIBE_ERROR
> > > > > > > > > > > > >     [javac] location: class
> > > > > > org.globus.exec.utils.Resources
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > Resources.SUBJOB_UNSUBSCRIBE_ERROR);
> > > > > > > > > > > > >     [javac]                                  ^
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > 857: cannot find symbol
> > > > > > > > > > > > >     [javac] symbol  : variable
> > > > > SUBJOB_STUB_SECURITY_ERROR
> > > > > > > > > > > > >     [javac] location: class
> > > > > > org.globus.exec.utils.Resources
> > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > Resources.SUBJOB_STUB_SECURITY_ERROR);
> > > > > > > > > > > > >     [javac]
> > ^
> > > > > > > > > > > > >     [javac] Note: Some input files use
unchecked
> > or
> > > > > unsafe
> > > > > > > > > > > operations.
> > > > > > > > > > > > >     [javac] Note: Recompile with
-Xlint:unchecked
> > for
> > > > > > > details.
> > > > > > > > > > > > >     [javac] 2 errors
> > > > > > > > > > > > >     [javac] 2 warnings
> > > > > > > > > > > > >
> > > > > > > > > > > > > BUILD FAILED
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > a-0.78.0/build.xml:39: Compile failed; see the
> > > > compiler
> > > > > > > error
> > > > > > > > > > output
> > > > > > > > > > > > for
> > > > > > > > > > > > > details.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Total time: 15 seconds
> > > > > > > > > > > > >
> > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > >
globus_scheduler_event_generator-1.0.1-src.tar.gz
> > > > > gcc32dbg
> > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
FOR
> > > > > > > > > > > > > globus_scheduler_event_generator
> > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > ator-1.0.1/
> > > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > > >
> > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > export
> > > > > > > > > > > > > GLOBUS_LOCATION;  CPP='/usr/bin/gcc -E';
export
> > CPP;
> > > > > > > > CPPFLAGS='
> > > > > > > > > > > > >
-I/usr/local/GridComputing/globus-4.0.1/include
> > > > > > > > > > > > >
> > > > > -I/usr/local/GridComputing/globus-4.0.1/include/gcc32dbg';
> > > > > > > > > export
> > > > > > > > > > > > > CPPFLAGS; CFLAGS='-g   -Wall'; export CFLAGS;
> > > > LDFLAGS='
> > > > > > > > > > > > > -L/usr/local/GridComputing/globus-4.0.1/lib';
> > export
> > > > > > > LDFLAGS;
> > > > > > > > > > > > > CXX='/usr/bin/g++'; export CXX;
> > CXXCPP='/usr/bin/g++
> > > > > -E';
> > > > > > > > export
> > > > > > > > > > > > CXXCPP;
> > > > > > > > > > > > > CXXFLAGS='-g  '; export CXXFLAGS;
> > F77='/usr/bin/g77';
> > > > > > export
> > > > > > > > > F77;
> > > > > > > > > > > > > AR='/usr/bin/ar'; export AR; ARFLAGS='ruv';
export
> > > > > > ARFLAGS;
> > > > > > > > > > > > > RANLIB='/usr/bin/ranlib'; export RANLIB;
> > > > NM='/usr/bin/nm
> > > > > > > -B';
> > > > > > > > > > export
> > > > > > > > > > > > NM;
> > > > > > > > > > > > > CC='/usr/bin/gcc'; export CC;
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > ator-1.0.1//configure  --with-flavor=gcc32dbg
> > > > > > > > > > > > > checking whether to enable maintainer-specific
> > > > portions
> > > > > of
> > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > no
> > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > /usr/bin/install
> > > > > > -c
> > > > > > > > > > > > > checking whether build environment is sane...
yes
> > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > config.status: creating
pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > config.status: creating doxygen/Makefile
> > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > >
> > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 3:23 PM
> > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > > Submission
> > > > > to
> > > > > > > > > Condor
> > > > > > > > > > > > > through GT4
> > > > > > > > > > > > >
> > > > > > > > > > > > > Hmm, I just downloaded the condor setup
package I
> > have
> > > > > up
> > > > > > > > there
> > > > > > > > > > now
> > > > > > > > > > > to
> > > > > > > > > > > > > check it myself and installed it without a
> > problem.
> > > > Try
> > > > > > > > > > downloading
> > > > > > > > > > > > > fresh copies of all the packages you need.
Just
> > for
> > > > > > sanity,
> > > > > > > > > > here's
> > > > > > > > > > > > the
> > > > > > > > > > > > > MD5 checksum:
> > > > > > > > > > > > >
> > > > > > > > > > > > > a37800228817290ccea05399ac986062
> > > > > > > > > > > > >
> > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > > > > >
> > > > > > > > > > > > > Peter
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Tue, 2005-09-27 at 13:50 -0400, Natarajan,
> > Senthil
> > > > > > wrote:
> > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > I downloaded your new package (after
bootstrap)
> > then
> > > > I
> > > > > > try
> > > > > > > > to
> > > > > > > > > > > > install
> > > > > > > > > > > > > it
> > > > > > > > > > > > > > gave me the following error.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > >
> > > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > gcc32dbg
> > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
FOR
> > > > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > >
> > > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > > export
> > > > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > > > checking whether to enable
maintainer-specific
> > > > > portions
> > > > > > of
> > > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > > no
> > > > > > > > > > > > > > Warning: package doesn't build with flavors
> > ignored
> > > > > > > > > > > > > > Warning:  ignored
> > > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > > /usr/bin/install
> > > > > > > -c
> > > > > > > > > > > > > > checking whether build environment is
sane...
> > yes
> > > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > > config.status: creating
pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > > config.status: error: cannot find input
file:
> > > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I thought of doing ./bootstrap in the source
> > > > > directory,
> > > > > > it
> > > > > > > > > gave
> > > > > > > > > > > the
> > > > > > > > > > > > > > following error.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [globus@gis14
> > > > > > globus_gram_job_manager_setup_condor-2.8.1]$
> > > > > > > > > > > > ./bootstrap
> > > > > > > > > > > > > > installing globus_automake_pre link
> > > > > > > > > > > > > > installing globus_automake_post link
> > > > > > > > > > > > > > installing globus_automake_pre_top link
> > > > > > > > > > > > > > installing globus_automake_post_top link
> > > > > > > > > > > > > > running aclocal  -I
> > > > > > > > > > > > > >
> > > > > > /usr/local/GridComputing/globus-4.0.1/share/globus_aclocal
> > > > > > > > -I
> > > > > > > > > > > > > >
> > > > > /usr/local/GridComputing/software/GPT/share/gpt/aclocal
> > > > > > > > > > > > > > running libtoolize --copy --force
> > > > > > > > > > > > > > running automake --copy -add-missing
--foreign
> > > > > > > > > > > > > > configure.in: installing `./mkinstalldirs'
> > > > > > > > > > > > > > running gpt_create_automake_rules
> > --excludes=doxygen
> > > > > > > > > > > > > > running autoconf
> > > > > > > > > > > > > > Can't locate object method "path" via
package
> > > > > > > > > > "Autom4te::Request"
> > > > > > > > > > > at
> > > > > > > > > > > > > > /usr/bin/autom4te line 81.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > ERROR: bootstrap failed!
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 1:18 PM
> > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > > > Submission
> > > > > > to
> > > > > > > > > > Condor
> > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > This one's my fault.  I forgot to bootstrap
the
> > > > source
> > > > > > > > package
> > > > > > > > > > > > before
> > > > > > > > > > > > > I
> > > > > > > > > > > > > > put it up on the web site.  Either download
the
> > > > > package
> > > > > > > > again
> > > > > > > > > (I
> > > > > > > > > > > > > > replaced the package file) or untar the
package
> > and
> > > > > > > execute
> > > > > > > > > > > > > ./bootstrap
> > > > > > > > > > > > > > in the source package directory.  You can
then
> > type
> > > > > > > > gpt-build
> > > > > > > > > > > > <flavor>
> > > > > > > > > > > > > > in the package directory.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I'm looking into the other package version
> > problem.
> > > > > The
> > > > > > > > major
> > > > > > > > > > > > version
> > > > > > > > > > > > > > number for the scheduler_event_generator
package
> > in
> > > > > the
> > > > > > > > trunk
> > > > > > > > > > got
> > > > > > > > > > > > > bumped
> > > > > > > > > > > > > > and I'm not sure why.  It might be as simple
as
> > > > > lowering
> > > > > > > the
> > > > > > > > > > major
> > > > > > > > > > > > > > version requirement in the job_manager
package
> > > > > > dependency,
> > > > > > > > but
> > > > > > > > > I
> > > > > > > > > > > > want
> > > > > > > > > > > > > to
> > > > > > > > > > > > > > make sure.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Tue, 2005-09-27 at 11:08 -0400,
Natarajan,
> > > > Senthil
> > > > > > > wrote:
> > > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > > I tried to install the package
> > > > > > > > > > > > > > >
globus_gram_job_manager_setup_condor-2.8.1, it
> > > > also
> > > > > > gave
> > > > > > > > the
> > > > > > > > > > > > > following
> > > > > > > > > > > > > > > error.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > > >
> > > > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > gcc32dbg
> > > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD
DEPENDENCIES
> > FOR
> > > > > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > >
> > > > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > > > export
> > > > > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > > > > sh: line 1:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
/usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > p_condor-2.8.1//configure: No such file or
> > > > directory
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Please let me know is either the package
is
> > > > missing
> > > > > > > > > something
> > > > > > > > > > or
> > > > > > > > > > > I
> > > > > > > > > > > > > am
> > > > > > > > > > > > > > > not updating correctly.
> > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > From: Natarajan, Senthil
> > > > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 10:22 AM
> > > > > > > > > > > > > > > To: 'Peter G Lane'
> > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in
Job
> > > > > > Submission
> > > > > > > to
> > > > > > > > > > > Condor
> > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > > As you mentioned, here I am trying to
build
> > the
> > > > > > package
> > > > > > > > from
> > > > > > > > > > Sep
> > > > > > > > > > > > > 23rd
> > > > > > > > > > > > > > > (globus_gram_job_manager-7.6.2) first and
then
> > the
> > > > > > > package
> > > > > > > > > > > > > > > globus_gram_job_manager_setup_condor-2.8.1
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > But I am getting this error in the Sep
23rd
> > > > package
> > > > > > > > itself,
> > > > > > > > > am
> > > > > > > > > > I
> > > > > > > > > > > > > > missing
> > > > > > > > > > > > > > > something? I have this gpt
> > (gpt-3.2autotools2004)
> > > > > and
> > > > > > > > > > > Globus4.0.1
> > > > > > > > > > > > > > > version.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > globus_gram_job_manager-7.6.2-
> > > > > > > > > > > > > > > src.tar.gz gcc32dbg
> > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > >
> > > > > > > > >
> > /usr/local/GridComputing/globus-4.0.1/BUILD/globus_core-4.26/
> > > > > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > > > > > > > > > > gpt-build ====> REMOVING empty package
> > > > > > > > > > > > > globus_core-gcc32dbg-pgm_static
> > > > > > > > > > > > > > > gpt-build ====> REMOVING empty package
> > > > > > > > > > globus_core-noflavor-doc
> > > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD
DEPENDENCIES
> > FOR
> > > > > > > > > > > > > > globus_gram_job_manager
> > > > > > > > > > > > > > > ERROR: The following packages are missing
> > > > > > > > > > > > > > > Package
> > > > > > > pgm_link-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > version
> > > > > > > > > > > > > 0.3
> > > > > > > > > > > > > > is
> > > > > > > > > > > > > > > incompatible with
> > globus_gram_job_manager-ANY-src
> > > > > > > > > > > > > > > Package
> > > > > > compile-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > version
> > > > > > > > > > > > 0.3
> > > > > > > > > > > > > > is
> > > > > > > > > > > > > > > incompatible with
> > globus_gram_job_manager-ANY-src
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Died at
> > > > > > > > /usr/local/GridComputing/software/GPT/sbin/gpt-build
> > > > > > > > > > > line
> > > > > > > > > > > > > 362,
> > > > > > > > > > > > > > > <FILE> line 105362.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > From: Peter G Lane
[mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > > > Sent: Monday, September 26, 2005 5:54 PM
> > > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in
Job
> > > > > > Submission
> > > > > > > to
> > > > > > > > > > > Condor
> > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On Mon, 2005-09-26 at 15:32 -0400,
Natarajan,
> > > > > Senthil
> > > > > > > > wrote:
> > > > > > > > > > > > > > > > Hi Peter,
> > > > > > > > > > > > > > > > I am seeing the extensions for
> > > > > > "transfer_input_file",
> > > > > > > > > > > similarly
> > > > > > > > > > > > > does
> > > > > > > > > > > > > > > it
> > > > > > > > > > > > > > > > has the "transfer_out_file" extension
also
> > in
> > > > > order
> > > > > > to
> > > > > > > > > > > transfer
> > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > output back.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > No, but I just put up a new update package
> > > > > > > > > > > > > > >
(globus_gram_job_manager_setup_condor-2.8.1)
> > that
> > > > > has
> > > > > > > > > support
> > > > > > > > > > > for
> > > > > > > > > > > > > that
> > > > > > > > > > > > > > > one.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > To install the update package, do I need
to
> > > > > compile
> > > > > > > > using
> > > > > > > > > > the
> > > > > > > > > > > > > > Makefile
> > > > > > > > > > > > > > > > and Install, and this will update only
the
> > > > condor
> > > > > > part
> > > > > > > > > > right?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > All you should have to do is the
following:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > gpt-build <package file name> <flavor>
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > For example:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > gpt-build
> > > > > > > > > >
globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > > > > > > gcc32dbg
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Note that on the download page it says
that it
> > > > > > requires
> > > > > > > > one
> > > > > > > > > of
> > > > > > > > > > > the
> > > > > > > > > > > > > > > packages from September 23rd
> > > > > > > > > (globus_gram_job_manager-7.6.2).
> > > > > > > > > > > > Make
> > > > > > > > > > > > > > sure
> > > > > > > > > > > > > > > to get that one too.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Actually I did added the two extensions
> > > > > > > > > > > > > > > > print SCRIPT_FILE "should_transfer_files
=
> > > > > > > IF_NEEDED\n";
> > > > > > > >
> > > > > > > > > > > > > > > > print SCRIPT_FILE "WhenToTransferOutput
=
> > > > > > > ON_EXIT\n\n";
> > > > > > > > in
> > > > > > > > > > > this
> > > > > > > > > > > > > file
> > > > > > > > > > > > > > > >
./lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > > > > > > > > > > > in order to get the job execute in
condor
> > pool
> > > > > > > > (previously
> > > > > > > > > I
> > > > > > > > > > > had
> > > > > > > > > > > > > > > problem
> > > > > > > > > > > > > > > > in executing the job).
> > > > > > > > > > > > > > > > Please let me know.
> > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > > From: Peter G Lane
[mailto:lane@xxxxxxxxxxx]
> >
> > > > > > > > > > > > > > > > Sent: Monday, September 26, 2005 2:46 PM
> > > > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > > Subject: Re: [Globus-discuss] Problem in
Job
> > > > > > > Submission
> > > > > > > > to
> > > > > > > > > > > > Condor
> > > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > The Condor adapter doesn't automatically
do
> > > > this.
> > > > > > > We've
> > > > > > > > > > added
> > > > > > > > > > > > > > support
> > > > > > > > > > > > > > > > in update packages for extensions to the
job
> > > > > > > description
> > > > > > > > > > that
> > > > > > > > > > > > will
> > > > > > > > > > > > > > > allow
> > > > > > > > > > > > > > > > you to set these parameters. See the
> > Bugzilla
> > > > > entry
> > > > > > > > about
> > > > > > > > > > this
> > > > > > > > > > > > > here:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > http://bugzilla.globus.org/bugzilla/show_bug.cgi?id=3773
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > On Mon, 2005-09-26 at 13:12 -0400,
> > Natarajan,
> > > > > > Senthil
> > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > I am trying to submit a XML Job
> > description to
> > > > > the
> > > > > > > > > Globus,
> > > > > > > > > > > > > Globus
> > > > > > > > > > > > > > in
> > > > > > > > > > > > > > > > > turn submits the job to the Condor.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Condor executes the job but it is not
> > copying
> > > > > back
> > > > > > > the
> > > > > > > > > > > output
> > > > > > > > > > > > > > file.
> > > > > > > > > > > > > > > > > But if try to submit the job directly
to
> > > > condor
> > > > > > > pool,
> > > > > > > > it
> > > > > > > > > > > > copies
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > > output file back to the specified
> > directory.
> > > > > Could
> > > > > > > any
> > > > > > > > > one
> > > > > > > > > > > > > please
> > > > > > > > > > > > > > > help
> > > > > > > > > > > > > > > > > me on this how to get the output file
back
> > in
> > > > > the
> > > > > > > > > > specified
> > > > > > > > > > > > > > > directory.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Here is the XML Job description.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > <?xml version="1.0" encoding="UTF-8"?>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > <multiJob
> > > > > > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > xmlns:gram="http://www.globus.org/namespaces/2004/10/gram/job";
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > >
xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/03/addressing";>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     <factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
https://gis14.exp.sis.pitt.edu:8443/wsrf/services/ManagedJobFactoryServi
> > > > > > > > > > > > > > > > ce
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         </wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > <gram:ResourceID>Multi</gram:ResourceID>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     </factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > <directory>${GLOBUS_LOCATION}</directory>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     <count>1</count>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     <job>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > >
> > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <argument>60</argument>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > <stdout>${GLOBUS_USER_HOME}/stdout.j3</stdout>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > <stderr>${GLOBUS_USER_HOME}/stderr.j3</stderr>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     </job>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     <job>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >                 https://
> > > > > > > > > > > > > > > > >
> > > > > > hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
<gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <argument>120</argument>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > <stdout>${GLOBUS_USER_HOME}/stdout.j4</stdout>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > <stderr>${GLOBUS_USER_HOME}/stderr.j4</stderr>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >     </job>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > </multiJob>
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > -
> > > > > > > > > > > > > > > > To Unsubscribe: send mail to
> > > > majordomo@xxxxxxxxxx
> > > > > > > > > > > > > > > > with "unsubscribe discuss" in the body
of
> > the
> > > > > > message
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > >
> 
> 

<?xml version="1.0" encoding="UTF-8"?>
<multiJob xmlns:gram="http://www.globus.org/namespaces/2004/10/gram/job";
     xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/03/addressing";>
    <factoryEndpoint>
        <wsa:Address>
            https://localhost:8443/wsrf/services/ManagedJobFactoryService
        </wsa:Address>
        <wsa:ReferenceProperties>
            <gram:ResourceID>Multi</gram:ResourceID>
        </wsa:ReferenceProperties>
    </factoryEndpoint>
    <directory>/home/senthil/GridTest</directory>
    <count>1</count>

    <job>
        <factoryEndpoint>
            <wsa:Address>
                https://localhost:8443/wsrf/services/ManagedJobFactoryService
            </wsa:Address>
            <wsa:ReferenceProperties>
                <gram:ResourceID>Condor</gram:ResourceID>
            </wsa:ReferenceProperties>
        </factoryEndpoint>
        <executable>sh_loop</executable>
        <argument>600</argument>
        <!--<stdout>${GLOBUS_USER_HOME}/stdout.j3</stdout>
        <stderr>${GLOBUS_USER_HOME}/stderr.j3</stderr>-->
        <stdout>output.j3</stdout>
        <stderr>stderr.j3</stderr>
        <count>1</count>
        <!--<extensions>
           <logfile>/home/senthil/logfile</logfile>
        </extensions>-->
        <extensions>
        <logfile>/home/senthil/logfile</logfile>
        <condor:should_transfer_files>YES</condor:should_transfer_files>
        <condor:WhenToTransferOutput>ON_EXIT</condor:WhenToTransferOutput>
        <!--<condor:when_to_transfer_output>ON_EXIT</condor:when_to_transfer_output>-->
        <!--<condor:Requirements>Arch=="SUN4u" && OpSys == "SOLARIS29"</condor:Requirements>-->
<!--<condor:transfer_output_files>/home/senthil/stdout.j3</condor:transfer_output_files>-->

<!--<condor:transfer_output_files>/home/senthil/stderr.j3</condor:transfer_output_files>-->
    </extensions>
</job>

    <job>
        <factoryEndpoint>
            <wsa:Address>
                https://localhost:8443/wsrf/services/ManagedJobFactoryService
            </wsa:Address>
            <wsa:ReferenceProperties>
                <gram:ResourceID>Condor</gram:ResourceID>
            </wsa:ReferenceProperties>
        </factoryEndpoint>
        <executable>sh_loop</executable>
        <argument>1200</argument>
        <!--<stdout>${GLOBUS_USER_HOME}/stdout.j4</stdout>
        <stderr>${GLOBUS_USER_HOME}/stderr.j4</stderr>-->
        <stdout>output.j4</stdout>
        <stderr>stderr.j4</stderr>
        <count>1</count>
        <extensions>
                <condor:should_transfer_files>YES</condor:should_transfer_files>
                <condor:WhenToTransferOutput>ON_EXIT</condor:WhenToTransferOutput>
                <!--<condor:transfer_output_files>/home/senthil/stdout.j4</condor:transfer_output_files>-->
                <!--<condor:transfer_output_files>/home/senthil/stderr.j4</condor:transfer_output_files>-->
       </extensions>
    </job>

</multiJob>