|
Do you have a shared file system in place? If not you will need to arrange for file transfers to be possible.
Can you also check your SchedLog and NegotiatorLog?
On 25 Jul 2007, at 20:32, Ary Junior wrote: Ok!
[aryjr@atena ~]$ condor_q -better-analyze 5
-- Submitter: atena.solidos.quimica.ufjf.br : <192.168.1.107:53583> : atena.solidos.quimica.ufjf.br
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
AddConstraint: Condition value not literal
---
005.000: Run analysis summary. Of 27 machines,
16 are rejected by your job's requirements
3 reject your job because of their own requirements
0 match but are serving users with a better priority in the pool
8 match but reject the job for unknown reasons
0 match but will not currently preempt their existing job
0 are available to run your job
The Requirements _expression_ for your job is:
( target.Arch == "INTEL" ) && ( target.OpSys == "LINUX" ) &&
( target.Disk >= DiskUsage ) && ( ( target.Memory * 1024 ) >= ImageSize ) &&
( ( target.HasFileTransfer ) || ( TARGET.FileSystemDomain == MY.FileSystemDomain ) )
Condition Machines Matched Suggestion
--------- ---------------- ----------
1 ( target.Arch == "INTEL" ) 11
2 ( target.OpSys == "LINUX" ) 27
3 ( target.Disk >= 10000 ) 27
4 ( ( 1024 * target.Memory ) >= 10000 )27
5 ( ( target.HasFileTransfer ) || ( TARGET.FileSystemDomain == "solidos.quimica.ufjf.br" ) )
27
The following attributes are missing from the job ClassAd:
CheckpointPlatform
And this is my condor pool:
[aryjr@atena ~]$ condor_status
Name OpSys Arch State Activity LoadAv Mem ActvtyTime
vm1@xxxxxxxxx LINUX INTEL Owner Idle 1.000 754 7+23:47:25
vm2@xxxxxxxxx LINUX INTEL Owner Idle 2.360 754 7+23:47:26
vm1@xxxxxxxxx LINUX INTEL Owner Idle 1.000 2025 6+05:21:19
vm2@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.010 2025 0+00:25:05
frea.solidos. LINUX INTEL Unclaimed Idle 0.000 502 0+02:41:36
vm1@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754 0+02:38:03
vm2@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754 0+02:38:04
vm1@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754[?????]
vm2@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754[?????]
vm1@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754[?????]
vm2@xxxxxxxxx LINUX INTEL Unclaimed Idle 0.000 754[?????]
vm1@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 491 0+00:06:46
vm2@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 491 0+00:06:46
vm3@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 491 0+00:06:47
vm4@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 491 0+00:06:48
vm5@xxxxxxxxx LINUX X86_64 Owner Idle 0.000 491 0+00:06:49
vm6@xxxxxxxxx LINUX X86_64 Owner Idle 0.000 491 0+00:06:50
vm7@xxxxxxxxx LINUX X86_64 Owner Idle 0.000 491 0+00:06:51
vm8@xxxxxxxxx LINUX X86_64 Owner Idle 0.000 491 0+00:06:44
vm1@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 994 6+23:05:48
vm2@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 994 6+23:05:49
vm3@xxxxxxxxx LINUX X86_64 Owner Idle 1.000 994 0+05:37:08
vm4@xxxxxxxxx LINUX X86_64 Unclaimed Idle 0.010 994 0+03:02:04
vm5@xxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 994 3+11:03:44
vm6@xxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 994 6+23:05:49
vm7@xxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 994 6+23:05:50
vm8@xxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 994 6+23:05:43
Total Owner Claimed Unclaimed Matched Preempting Backfill
INTEL/LINUX 11 3 0 8 0 0 0
X86_64/LINUX 16 11 0 5 0 0 0
Total 27 14 0 13 0 0 0
Thanks very much!!!
On 7/25/07, Jones, Torrin A (US SSA) <torrin.jones@xxxxxxxxxxxxxx> wrote: Hmmm . . . not enough info. What does "condor_q -analyze" say? What does "condor_q -better-analyze" say? Hi, I have a litle problem with my condor pool... when I execute condor_submit from any host the job go to the pool but never run... the condor_q output is:
[aryjr@atena 7]$ condor_q
-- Submitter: atena.solidos.quimica.ufjf.br : <192.168.1.107:53583> : atena.solidos.quimica.ufjf.br
ID OWNER SUBMITTED RUN_TIME ST PRI SIZE CMD
5.0 aryjr 7/25 16:02 0+00:00:00 I 0 9.8 zr2o4ti2o4.sh
1 jobs; 1 idle, 0 running, 0 held
My submt file ( from a web tutorial ) contents is:
universe = vanilla
executable = zr2o4ti2o4.sh
output = zr2o4ti2o4.sh.out
error = zr2o4ti2o4.sh.err
log = zr2o4ti2o4.sh.log
should_transfer_files = IF_NEEDED
when_to_transfer_output = ON_EXIT
queue
If I run the same job from my master machine it's run normaly. What is wrong with my .submit file?
Thanks very much!!!
Ary Junior
_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
_______________________________________________ Condor-users mailing list subject: Unsubscribe You can also unsubscribe by visiting
The archives can be found at:
|
![[Computer Systems Lab]](https://www-auth.cs.wisc.edu/pics/csl_logo.gif){kind=logo}