[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Condor-users] condor 7.0.3 or 7.1.0 STARTD and/or COLLECTOR die with signal 8 (Floating point exception)



Hello again,

Compiling the source fixed the issue :)
I think that (as Simon said) it was some incompatibility between the binary and
the OS.

Thank you.

-- 
Alex

On 14:45 Fri 27 Jun     , Alexandru Munteanu wrote:
> On 13:40 Fri 27 Jun     , Simon Hammond wrote:
> > Have you selected the same distribution file for each O/S? We had a similar
> > problem when we tried to use Condor RedHat Ent. 4 on a RedHat Ent 3 box.
> 
> Thank you for the quick reply.
> 
> I have just downloaded 'condor-7.1.0-linux-x86-debian40.tar.gz',
> which was one of the 'closest' binaries for the debian-based distributions
> (though it also worked on gentoo).
> 
> I will try to compile the source and see if it works.
> 
> -- 
> Alex
> 
> > Si Hammond
> > High Performance Systems Group
> > University of Warwick
> > 
> > 2008/6/27 Alexandru Munteanu <munteanu@xxxxxxxxxxxxxxxx>:
> > 
> > > Hello,
> > >
> > > I set up the debian static condor version 7.0.3 x86 on 4 machines having
> > > the
> > > following GNU/Linux distributions installed :
> > >
> > >  1) gentoo x86_64
> > >  2) current debian testing x86_64
> > >  3) sidux x86_64 (a debian-based distribution)
> > >  4) ubuntu gutsy x86_64
> > >
> > > As far as I know, machine 3) and 4) have almost the same hardware.
> > >
> > > Condor works very well with machines 1, 2 and 3, but when I test it on
> > > machine 4), I get 'Floating point exception's on the COLLECTOR and STARTD.
> > >
> > > Here is the error I have on STARTD :
> > >
> > >  ==> local.micheline/log/MasterLog <==
> > >  6/27 14:00:59 The STARTD (pid 3163) died due to signal 8 (Floating point
> > > exception)
> > >  6/27 14:00:59 Sending obituary for
> > > "/home/condor/condor-7.1.0/sbin/condor_startd"
> > >  6/27 14:00:59 restarting /home/condor/condor-7.1.0/sbin/condor_startd in
> > > 11 seconds
> > >  6/27 14:01:10 Started DaemonCore process
> > > "/home/condor/condor-7.1.0/sbin/condor_startd", pid and pgroup = 3189
> > >
> > > I have also tried with version 7.1.0 and I get the same error.
> > >
> > > Any idea why I get this error ?
> > >
> > > Please tell me what do you need as extra information or how to debug it.
> > >
> > > Thank you.
> > >
> > > Best regards,
> > > --
> > > Alexandru Munteanu
> > >
> > > _______________________________________________
> > > Condor-users mailing list
> > > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> > > subject: Unsubscribe
> > > You can also unsubscribe by visiting
> > > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> > >
> > > The archives can be found at:
> > > https://lists.cs.wisc.edu/archive/condor-users/
> > >
> 
> > _______________________________________________
> > Condor-users mailing list
> > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> > subject: Unsubscribe
> > You can also unsubscribe by visiting
> > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> > 
> > The archives can be found at: 
> > https://lists.cs.wisc.edu/archive/condor-users/
> 
> 
> -- 
> Alexandru Munteanu

-- 
Alexandru Munteanu