Hi all,I just removed VMWare server 2.0 and installed 1.0.7. But still it doesnot work. When I type the command below one entry isHasVM = FALSE.So I must have done something wrong, but I don't know what. As allready said, I enabled vm universe during installation. Is there any information I can give you to solve the issue?Many thanksWolfgangNokia Siemens Networks GmbH & Co. KG
COO IPT DWDM RD DEV HW1 SDE
Hofmannstraße 51, 81379 München
Gebäude 1713, Raum 220
Tel(1).: +49-89-636-86125
Tel(2).: +49-89-722-31270
Tel(3).: +49-89-5159-21270
Fax: +49-89-636-55900
wolfgang.schairer@xxxxxxx
Nokia Siemens Networks GmbH & Co. KG - Sitz der Gesellschaft/ Registered office: München (Munich) - Registergericht /Commercial register: München (Munich), HRA 88537 - WEEE-Reg.-No. DE 52984304. Persönlich haftende Gesellschafterin /General Partner: Nokia Siemens Networks Management GmbH - Geschäftsführer /Board of Directors: Joachim Malterer, Lydia Sommer- Sitz der Gesellschaft / Registered office: München (Munich) - Registergericht /Commercial register: München (Munich), HRB 163415
From: condor-users-bounces@xxxxxxxxxxx [mailto:condor-users-bounces@xxxxxxxxxxx] On Behalf Of ext Douglas Clayton
Sent: Wednesday, February 18, 2009 6:03 PM
To: Condor-Users Mail ListSubject: Re: [Condor-users] VMWare server 2.0 supported?Wolfgang,Out of curiosity, what is the classad for the machine you have VMWare and the VM Universe configured on? You can get this by typing:condor_status -long HOSTNAMEThat will help figure out this situation.Thanks,DougOn Feb 18, 2009, at 4:28 AM, Schairer, Wolfgang (NSN - DE/Munich) wrote:
Hi all,I want to use the vm universe of condor on a cluster of windows machines (XP32, XP 64 and Vista64). To do a first test, I installed condor 7.2.0 with vm universe enabled on one machine (the others are running 7.0). This machine should be the submit and execute machine for this test. I also installed ActivePerl and VMWare server 2.0 (the current release). When I now submit a vm ware job, it will not run. When I run condor_q xxx -analyze, it saysWARNING: Be advised:
No resources matched request's constraints
Check the Requirements _expression_ below:Requirements = ((Arch == "INTEL") && (HasVM) && (VM_Type == "vmware") && (VM_AvailNum > 0) && (TotalDisk >= DiskUsage) &
& (HasFileTransfer)) && (TotalMemory >= 256) && (VM_Memory >= 256)the job description file for this job is:universe=vm
executable=test
prio=15log=log.txtvm_type = vmware
vm_memory=256
vm_networking = falsevmware_dir=D:\Virtual Machines\WinXP
vmware_should_transfer_files=truequeueThe memory limits configured in condor_config isVM_MEMORY = 1024in condor_vmgahp_config.vmwareVM_MAX_MEMORY = 1024So I do not see a reason why the submit machine does not fulfill the requirements to run the vm_universe job. Therefor my assumtion was that VMWare server 2.0 is not supported. Is this correct?btw: condor_status -vm does not show any machine, althoug I enabled vm universe during the installation of condor.Many thanks in advance!Wolfgang_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
--===================================
Douglas Claytonphone: 919.647.9648
Cycle Computing, LLC
Leader in Condor Grid Solutions
Enterprise Condor Support and Management Tools
http://www.cyclecomputing.com
_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/