On Fri, Jul 2, 2010 at 4:51 PM, GUNJIT MISHRA
<gunjit3788@xxxxxxxxx> wrote:
Hi,
Looks like condor is having problem creating condor-reuse-slot1 dynamic user .
You can verify if a user is created on execute machine :
1. type mmc in command promp
2. goto File-> add remove snap in
3. click add and add the local user and group snap in
4 in users check if a condor-reuse-slot1 account is created or not
5. if created double click it and check that it is not locked out
6. if it is not there you can create it manually by right clicking and adding
after these try to run the jobs again. if problem exists also enable debugging in log and post it here again.
Gunjit Mishra
B-Tech Part III
Computer Science Department,
IT-BHU, Varanasi
mob : 9457408418
Hi,
I am loosing communication between SHADOW
and STARTER daemons. Looking at their log files that I paste below:
The ShadowLog shows:
7/1 11:54:41 ******************************************************
7/1 11:54:41 ** condor_shadow (CONDOR_SHADOW) STARTING
UP
7/1 11:54:41 ** C:\Condor\bin\condor_shadow.exe
7/1 11:54:41 ** SubsystemInfo: name=SHADOW type=SHADOW(6)
class=DAEMON(1)
7/1 11:54:41 ** Configuration: subsystem:SHADOW local:<NONE>
class:DAEMON
7/1 11:54:41 ** $CondorVersion: 7.2.4 Jun 15 2009
BuildID: 159529 $
7/1 11:54:41 ** $CondorPlatform: INTEL-WINNT50 $
7/1 11:54:41 ** PID = 1580
7/1 11:54:41 ** Log last touched 6/30 13:30:28
7/1 11:54:41 ******************************************************
7/1 11:54:41 Using config source: C:\condor\condor_config
7/1 11:54:41 Using local config sources:
7/1 11:54:41 C:\condor/condor_config.local
<snip>
7/1 11:54:41 DaemonCore: Command Socket at <10.3.28.8:45848>
7/1 11:54:41 Initializing a VANILLA shadow for job
9.0
7/1 11:54:42 (9.0) (1580): Request to run on slot1@xxxxxxxxxxxxxxxxxxxx
<10.11.3.133:10882> was ACCEPTED
7/1 11:54:56 (9.0) (1580): condor_read(): recv() returned
-1, errno = 10054, assuming failure reading 5 bytes from <10.11.3.133:10882>.
7/1 11:54:56 (9.0) (1580): IO: Failed to read packet
header
7/1 11:54:56 (9.0) (1580): Can no longer talk to condor_starter
<10.11.3.133:10882>
7/1 11:54:56 (9.0) (1580): Trying to reconnect to
disconnected job
7/1 11:54:56 (9.0) (1580): LastJobLeaseRenewal: 1277996096
Thu Jul 01 11:54:56 2010
7/1 11:54:56 (9.0) (1580): JobLeaseDuration: 1200
seconds
7/1 11:54:56 (9.0) (1580): JobLeaseDuration remaining:
1200
7/1 11:54:56 (9.0) (1580): Attempting to locate disconnected
starter
7/1 11:54:56 (9.0) (1580): locateStarter(): ClaimId
(<10.11.3.133:10882>#1277995944#1#9a100f3b140949e336ed2e5322947dd25e5971fa)
and GlobalJobId ( PC284419.corp.ad.emb#9.0#1277996003 ) not found
7/1 11:54:56 (9.0) (1580): Reconnect FAILED: Job not
found at execution machine
7/1 11:54:56 (9.0) (1580): **** condor_shadow (condor_SHADOW)
pid 1580 EXITING WITH STATUS 107
The StarterLog.slot1 shows:
7/1 11:54:55 KEYCACHE: created: 00B87160
7/1 11:54:55 ******************************************************
7/1 11:54:55 ** condor_starter (CONDOR_STARTER) STARTING
UP
7/1 11:54:55 ** C:\Condor\bin\condor_starter.exe
7/1 11:54:55 ** SubsystemInfo: name=STARTER type=STARTER(8)
class=DAEMON(1)
7/1 11:54:55 ** Configuration: subsystem:STARTER local:<NONE>
class:DAEMON
7/1 11:54:55 ** $CondorVersion: 7.2.4 Jun 15 2009
BuildID: 159529 $
7/1 11:54:55 ** $CondorPlatform: INTEL-WINNT50 $
7/1 11:54:55 ** PID = 5276
7/1 11:54:55 ** Log last touched time unavailable
(No such file or directory)
7/1 11:54:55 ******************************************************
7/1 11:54:55 Using config source: C:\Condor\condor_config
7/1 11:54:55 Using local config sources:
7/1 11:54:55 C:\condor/condor_config.local
<snip>
7/1 11:54:55 DaemonCore: Command Socket at <10.11.3.133:7721>
7/1 11:54:55 GLEXEC_JOB not supported on this platform;
ignoring
7/1 11:54:55 Setting resource limits not implemented!
7/1 11:54:55 Communicating with shadow <10.3.28.8:45848>
7/1 11:54:55 Submitting machine is "10-3-28-8.sjk.emb"
7/1 11:54:55 setting the orig job name in starter
7/1 11:54:55 setting the orig job iwd in starter
7/1 11:54:56 LogonUser(condor-reuse-slot1,
... ) failed with status 1385
7/1 11:54:56 ERROR "Failed to create a user nobody"
at line 442 in file ..\src\condor_c++_util\uids.cpp
7/1 11:54:56 ERROR "LocalUserLog::logStarterError()
called before init()" at line 222 in file ..\src\condor_starter.V6.1\local_user_log.cpp
The LogonUser message above shows a
"Logon failure: the user has not been granted the requested logon
type at this computer."
Our IT administrator people are implementing
a new security baseline on the machines and seems that condor-reuse-slotn
has no rights to run the job anymore. There are some rights that are not
being granted for local accounts.
Does one have any suggestion to fix
it?
Regards, Klaus
This message is intended solely for the
use of its addressee and may contain privileged or confidential information.
All information contained herein shall be treated as confidential and shall
not be disclosed to any third party without Embraer’s prior written approval.
If you are not the addressee you should not distribute, copy or file this
message. In this case, please notify the sender and destroy its contents
immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações
privilegiadas e confidenciais. Todas as informações aqui contidas devem
ser tratadas como confidenciais e não devem ser divulgadas a terceiros
sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
![[Computer Systems Lab]](https://www-auth.cs.wisc.edu/pics/csl_logo.gif){kind=logo}