Re: [HTCondor-users] Nodes missing in condor_status list

[Lukas Koschmieder <Lukas.Koschmieder@xxxxxxxxxxxxxxxxxxx>]

Thanks! Adding the line UPDATE_COLLECTOR_WITH_TCP = TRUE to my condor_config.local has solved the problem.

-----Ursprüngliche Nachricht-----
Von: HTCondor-users [mailto:htcondor-users-bounces@xxxxxxxxxxx] Im Auftrag von Zachary Miller
Gesendet: Donnerstag, 18. September 2014 21:21
An: HTCondor-Users Mail List
Betreff: Re: [HTCondor-users] Nodes missing in condor_status list

On Thu, Sep 18, 2014 at 10:25:00AM +0000, Lukas Koschmieder wrote:
> Hi,
> 
> I've set COLLECTOR_DEBUG to D_SECURITY but /var/log/condor/CollectorLog doesn't  contain any PERMISSION DENIED lines.
> 
> There is an entry in the collector log though saying that my external/invisible node is granted READ level access (which explains why I can see my Condor pool on this node even though the not itself is not being listed):
> 
> 09/18/14 10:47:57 PERMISSION GRANTED to unauthenticated@unmapped from 
> host <IP> for command 5 (QUERY_STARTD_ADS), access level READ: reason: 
> READ authorization policy allows IP address <IP>; identifiers used for 
> this remote host <IP>, <HOSTNAME>
> 
> But I can't find a corresponding line for WRITE level access. Actually, there is no such line even for the other node which do show up in the condor_status list... So how do I verify that a given node has been given WRITE access by the collector?

If you aren't seeing the machines in condor_status, and you aren't seeing PERMISSION DENIED, it sounds like the updates aren't even making it to the collector.  Is it possible UDP packets could not get routed between the two networks?  Perhaps try TCP updates:
  http://research.cs.wisc.edu/htcondor/manual/v8.2/3_7Networking_includes.html#SECTION00475000000000000000

And see if that changes anything.

Perhaps a longer chunk of the CollectorLog may help as well... feel free to send that off-list if you'd like me to look at it.  You should see lines like:
  ScheddAd     : Inserting ** "< ingwe.cs.wisc.edu , 128.105.121.64 >"
  StartdAd     : Inserting ** "< slot1@xxxxxxxxxxxxxxxxx , 128.105.121.64 >"

When ads are succesfully making it to the collector.


Cheers,
-zach

_______________________________________________
HTCondor-users mailing list
To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/htcondor-users/