[HTCondor-users] Configuring a CE/Schedd

[Iain Bradford Steers <iain.steers@xxxxxxx>]

Hi,

I'm in the process of finalizing our CE/Schedd setup for our pool, we're using Puppet.

I had the CE working and acting as a scheduler with a manual config and decided to move it to the HEP-Puppet/htcondor module.

This is the output I get in SchedLog(*), I've removed the ip but it's the machine's own ip in all instances.

After this it just proceeds to spam condor_write errors until it fills the log file and starts a new one.

The ce is in the certificate mapfile along with all the other hosts and apart from the ordering of hostnames a vimdiff shows no difference between the security config file for this and the one that the central manager uses.

Has anyone else experienced this issue?

Thanks, Iain

(*)

03/24/15 19:12:28 Address rewriting: Warning: attribute 'ScheddIpAddr' <MACHINE_IP:9618?noUDP&sock=17305_aee5_3> == <MACHINE_IP:9618?noUDP&sock=17305_aee5_3>, but old logic couldn't find the command port for outbound interface MACHINE_IP.

03/24/15 19:12:28 Address rewriting: Warning: attribute 'ScheddIpAddr' address in ad (<MACHINE_IP:9618?noUDP&sock=17305_aee5_3>) == command socket (<MACHINE_IP:9618?noUDP&sock=17305_aee5_3>), but old logic couldn't find that command socket in its list.

03/24/15 19:12:28 Address rewriting: Warning: attribute 'MyAddress' <MACHINE_IP:9618?noUDP&sock=17305_aee5_3> == <MACHINE_IP:9618?noUDP&sock=17305_aee5_3>, but old logic couldn't find the command port for outbound interface MACHINE_IP.

03/24/15 19:12:28 Address rewriting: Warning: attribute 'MyAddress' address in ad (<MACHINE_IP:9618?noUDP&sock=17305_aee5_3>) == command socket (<MACHINE_IP:9618?noUDP&sock=17305_aee5_3>), but old logic couldn't find that command socket in its list.

03/24/15 19:12:33 -------- Begin starting jobs --------

03/24/15 19:12:33 -------- Done starting jobs --------

03/24/15 19:13:14 Received a superuser command

03/24/15 19:13:14 This process has a valid certificate & key

03/24/15 19:13:14 Failed to read end of message from <MACHINE_IP:34711>; 1280 untouched bytes.

03/24/15 19:13:14 condor_write(): Socket closed when trying to write 13 bytes to <MACHINE_IP:34711>, fd is 15, errno=104 Connection reset by peer

03/24/15 19:13:14 Buf::write(): condor_write() failed

03/24/15 19:13:14 condor_read(): Socket closed when trying to read 5 bytes from <MACHINE_IP:34711> in non-blocking mode

03/24/15 19:13:14 IO: EOF reading packet header

03/24/15 19:13:14 condor_read(): Socket closed when trying to read 5 bytes from <MACHINE_IP:34711>

03/24/15 19:13:14 IO: EOF reading packet header

03/24/15 19:13:14 AUTHENTICATE: handshake failed!

03/24/15 19:13:14 DC_AUTHENTICATE: required authentication of 128.142.132.67 failed: AUTHENTICATE:1002:Failure performing handshake|AUTHENTICATE:1004:Failed to authenticate using FS|FS:1004:Unable to lstat(/tmp/FS_XXXWRRJqi)|AUTHENTICATE:1004:Failed to authenticate using FS|AUTHENTICATE:1004:Failed to authenticate using KERBEROS|AUTHENTICATE:1004:Failed to authenticate using GSI|GSI:5002:Failed to authenticate because the remote (client) side was not able to acquire its credentials.