[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [HTCondor-users] HTCondor on multiple NICs - how to force HTCondor to use eth1 over eth0?
- Date: Thu, 23 Jun 2016 11:29:16 +0200
- From: Steffen Grunewald <Steffen.Grunewald@xxxxxxxxxx>
- Subject: Re: [HTCondor-users] HTCondor on multiple NICs - how to force HTCondor to use eth1 over eth0?
On Thu, 2016-06-23 at 07:06:51 +0000, Todd Tannenbaum wrote:
> On Jun 23, 2016, at 1:40 AM, Jason Liu <jason.liu@xxxxxxxxxxxxx<mailto:jason.liu@xxxxxxxxxxxxx>> wrote:
> I am running HTCondor on a machine with two NICs. Unfortunately I do not control the network configuration on that machine.
> Its network is setup as follows:
> eth0: 10.0.2.15/24 (static IP)
> eth1: 192.168.20.160/24 (dynamic IP)
> HTCondor keeps using eth0 and I could not find a way to make it use eth1. I've read the Networking section in the manual about NETWORK_INTERFACE = <IP address> but what if the IP is dynamic?
> I really need something like NETWORK_INTERFACE = 192.168.20.160/24, or NETWORK_INTERFACE = eth1
> Is there a way to configure HTCondor to do this?
> According to the HTCondor v8.4 Manual, you should be able to do
> NETWORK_INTERFACE = eth1
> Or alternatively
> NETWORK_INTERFACE = 192.168.*
> Note that after changing NETWORK_INTERFACE, it is not enough to just do a condor_reconfig; you must kill off and then totally restart the HTCondor service.
According to my records (and setup) you should also add
BIND_ALL_INTERFACES = False
Maybe that's obsolete now...