[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Condor-users] flocking



George,
       This is just a guess, but is this port open, i.e. 9687. We
specify a range of ports to run condor using highport and lowport
settings, and allow these ports access through the firewall.
       And incidentally, are you using windows xp with the service
pack2?
Kevan

-----Original Message-----
From: condor-users-bounces@xxxxxxxxxxx
[mailto:condor-users-bounces@xxxxxxxxxxx] On Behalf Of George Gensure
Sent: 09 November 2004 16:47
To: Condor-Users Mail List
Subject: [Condor-users] flocking


I've asked about this before and still received no answer, can *anyone* 
that has a windows cm/exec cluster tell me what I'm doing wrong here?

flock_from cm condor_config entries:
FLOCK_FROM = 10.142.1.6
FLOCK_TO = 10.142.1.6
FLOCK_NEGOTIATOR_HOSTS = $(FLOCK_TO)
FLOCK_COLLECTOR_HOSTS = $(FLOCK_TO)
HOSTALLOW_READ = 10.*
HOSTALLOW_WRITE = 10.*
HOSTALLOW_NEGOTIATOR_SCHEDD = $(NEGOTIATOR_HOST),
$(FLOCK_NEGOTIATOR_HOSTS)

flock_from cm schedd log entries:
11/9 11:34:47 Out of servers - 0 jobs matched, 20 jobs idle, 1 jobs
rejected 11/9 11:34:47 Increasing flock level for user@xxxxxxxxxx to 1.
11/9 11:34:48 Sent ad to 1 collectors for user@xxxxxxxxxx 11/9 11:38:03
DaemonCore: Command received via TCP from host 
<10.142.1.6:9687>
11/9 11:38:03 DaemonCore: received command 416 (NEGOTIATE), calling 
handler (negotiate)
11/9 11:38:05 Unknown negotiator (<10.142.1.6:9687>).  Aborting
negotiation.

flock_to cm condor_config entries: (not that these should matter much...

just a two way flock)
FLOCK_FROM = 10.14.2.185
FLOCK_TO = 10.14.2.185
FLOCK_NEGOTIATOR_HOSTS = $(FLOCK_TO)
FLOCK_COLLECTOR_HOSTS = $(FLOCK_TO)
HOSTALLOW_NEGOTIATOR_SCHEDD = $(NEGOTIATOR_HOST),
$(FLOCK_NEGOTIATOR_HOSTS)

flock_to cm schedd log entries:
11/9 11:43:05 ---------- Started Negotiation Cycle ---------- 11/9
11:43:05 Phase 1:  Obtaining ads from collector ...
11/9 11:43:05   Getting all public ads ...
11/9 11:43:05   Sorting 33 ads ...
11/9 11:43:05   Getting startd private ads ...
11/9 11:43:05 Got ads: 33 public and 11 private
11/9 11:43:05 Public ads include 1 submitter, 11 startd
11/9 11:43:05 Phase 2:  Performing accounting ...
11/9 11:43:05 Phase 3:  Sorting submitter ads by priority ... 11/9
11:43:05 Phase 4.1:  Negotiating with schedds ...
11/9 11:43:05   Negotiating with user@xxxxxxxxxx at <10.14.2.185:9650>
11/9 11:43:07 condor_read(): recv() returned -1, errno = 10054, assuming

failure.
11/9 11:43:07     Failed to get reply from schedd
11/9 11:43:07   Error: Ignoring schedd for this cycle
11/9 11:43:07 ---------- Finished Negotiation Cycle ----------

can anyone lend a bit of advice?

Thanks,
-George
_______________________________________________
Condor-users mailing list
Condor-users@xxxxxxxxxxx
http://lists.cs.wisc.edu/mailman/listinfo/condor-users