[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Condor-users] Globus jobs failing using Condor-G

Thanks a lot for the help, I set highport and lowport and opened those ports 
and the job went through, I was thinking it was the globus ports that needed 
to be opened.


On Wednesday 29 September 2004 12:24 pm, Carey Kireyev wrote:
> Hi Arun,
> i suspect the problem is that the gatekeeper node cannot talk back to
> the client (Condor-G) machine (due to the firewall).
> To get more specific information, do the following:
> 1) set the GRIDMANAGER_DEBUG = D_FULLDEBUG in your condor-g
> condor_config file
> 2) re-submit the job
> 3) in your gridmanger log file (GRIDMANAGER_LOG, usually =
> /tmp/GridmanagerLog.<user>), look at the RSL clause, e.g.:
> 9/28 17:57:15 [20727] Final RSL:
> &(rsl_substitution=(GRIDMANAGER_GASS_URL
> https://vdt-redhat9.cs.wisc.edu:57943))(executable=$(GRIDMANAGER_GASS_URL)#
> hdir='')(directory=$(SCRATCH_DIRECTORY))(stdout=$(GRIDMANAGER_GASS_URL)#'/h
> yev/tmp/out-g')(stderr=$(GRIDMANAGER_GASS_URL)#'/home/ckireyev/tmp/err-g')(
> eout=240)(save_state=yes)(two_phase=600)(remote_io_url=$(GRIDMANAGER_GASS_U
> The GRIDMANAGER_GASS_URL (e.g. https://vdt-redhat9.cs.wisc.edu:57943) is
> the address on the client (Condor-G machine) that the gatekeeper tries
> to connect to but probably cannot in your case.
> To test, you can ssh into the gatekeeper machine and use telnet to
> connect to that address. (If everything's ok you should get "connection
> closed by host". If the server can't connect, you should get "connection
> refused" / "connection timeout", etc).
> If that's not the problem check to make sure that the clock skew between
> server and client is not too great.
> Carey Kireyev
> Condor Team
> On Wed, 2004-09-29 at 10:09, A Nayar wrote:
> > I have successfully tested submitting globus jobs to the teragrid through
> > condor-g in one of our pools but in the other pool which is firewalled I
> > could not, I opened up all the ports that globus is supposed to use but
> > still get the error 74: failed to open stderr
> >
> > I can do a grid-proxy-init allright but no globus-job-run. Also I just
> > installed the resource management bundle because on condor-g install page
> > it said thats all that is needed. Any help would be appreciated
> >
> > TIA
> > Arun
> _______________________________________________
> Condor-users mailing list
> Condor-users@xxxxxxxxxxx
> http://lists.cs.wisc.edu/mailman/listinfo/condor-users

My PGP key is available on all PGP public keyservers under anayar1@xxxxxxxxxxx 
or KeyID 8A0E9415