Re: [Condor-users] Can't add machines into my condor pool

[Lukas Slebodnik <slebodnik@xxxxxxxx>]

What you can see in StartLog on compute machine? 
You can enable verbose output setting STARTD_DEBUG = D_FULLDEBUG in your local
config file.

You should see something similar:
11/10/11 11:28:45 Attempting to send update via UDP to collector head1.local
<192.168.80.10:9618>
11/10/11 11:28:45 slot1: Sent update to 1 collector(s)

Also you should lok into central manager CollectorLog

Regards,
Lukas

On Thu, Nov 10, 2011 at 07:15:31PM +0900, dongha Jung wrote:
> Thank you, Raman.
> 
> I tried the "sentenforce 0", but doesn't work.
> 
> I rarely modified my local config file; just added ALLOW_READ/WRITE. Below
> is from the local config of non-central machine. I only  took lines (which
> I think) relevant.
> 
> CONDOR_HOST = 163.152.73.98
> UID_DOMAIN = 163.152.73.100
> FILESYSTEM_DOMAIN = 163.152.73.100
> ALLOW_READ      = 163.152.73.98, 163.152.73.100, 163.152.73.70
> ALLOW_WRITE     = 163.152.73.98, 163.152.73.100, 163.152.73.70
> 
> *condor_config_val* -dump shows above are set as I intended.
> 
> I also tried *ps aux | grep condor*, and it shows collector and negotiator
> are running.
> 
> Anything else I can try?
> 
> On Thu, Nov 10, 2011 at 6:08 PM, Raman Sehgal <sc.ramansehgal@xxxxxxxxx>wrote:
> 
> > Hello Dongha,
> >      I think your compute machine is not passing there resource information
> > to central manager that's why you are not able to see the resources of
> > other machines.
> >
> >     If possible could you please send you condor_config.local file so that
> > people can have look at it and then it will be easy to bug it out.
> >
> > you have already tried to turn off the firewall, i suggest one more thing
> > please try it after disabling "selinux" which can be done easily through
> > "setenforce 0" command with root privileges.
> >
> > try these things and let us know the results, if it still doesn't work then
> > send your "condor_config.local" file
> >
> >
> >
> > cheers,
> > On Thu, Nov 10, 2011 at 9:58 AM, dongha Jung <dongha@xxxxxxxxx> wrote:
> >
> >> Hi everyone.
> >>
> >> I have a problem about adding machines into my condor pool.
> >>
> >> I've installed condor(7.6.3) on three machines which run same OS (Fedora
> >> 14), and set one of them as a central manager.
> >>
> >> The central machine, by itself alone, submits and executes
> >> jobs successfully.
> >>
> >> However, when i execute *condor_status *command (both on the manager and
> >> other machines), it only shows the slots of the central manager. (Turning
> >> on/off firewall doesn't changed anything, so network isn't the reason)
> >>
> >> I modified ALLOW_WRITE and ALLOW_READ of condor_config files of
> >> machines (both of local and global to be sure) to include IP addresses of
> >> the machines like follows, but* condor_status* shows just same number of
> >> slot.s
> >>
> >> ALLOW_READ = xxx.xxx.xxx.1, xxx.xxx.xxx.2, xxx.xxx.xxx.3
> >> ALLOW_WRITE = xxx.xxx.xxx.1, xxx.xxx.xxx.2, xxx.xxx.xxx.3
> >>
> >> Can anyone help me please?
> >>
> >> Dongha Jung.
> >>
> >> _______________________________________________
> >> Condor-users mailing list
> >> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> >> subject: Unsubscribe
> >> You can also unsubscribe by visiting
> >> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >>
> >> The archives can be found at:
> >> https://lists.cs.wisc.edu/archive/condor-users/
> >>
> >>
> >
> >
> >
> > _______________________________________________
> > Condor-users mailing list
> > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> > subject: Unsubscribe
> > You can also unsubscribe by visiting
> > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >
> > The archives can be found at:
> > https://lists.cs.wisc.edu/archive/condor-users/
> >
> >

> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/