Hi,
Installation of Solaris 9 during naked checkpoint creation fails with
a segmentation fault.
Outputs of both terminals are given here.
Output on the simics terminal:
........
CRAFF warning: File was not closed cleanly; may be corrupted
.........
[qlc24B_2 info] Disk registering: Loop id: 0x3
...........
[system info] Disabling slave processors.
[cd25B_2_6 info] Unimplemented SCSI Command: GET CONFIGURATION (SCSI-3) (0x46)
[system info] Enabling slave processors.
*** Simics getting shaky, switching to 'safe' mode.
Simics (main thread) received a segmentation fault. Will try to recuperate.
Starting command line. (May have skipped commands in script files.)
System console output:
*****
....
ssd37 at fp1: name w2100000000000025,0, bus address c7
ssd37 is /ssm@0,0/pci@1c,700000/SUNW,qlc@2/fp@0,0/ssd@w2100000000000025,0
WARNING: /ssm@0,0/pci@1c,700000/SUNW,qlc@2/fp@0,0/ssd@w2100000000000025,0
(ssd37):
Corrupt label; wrong magic number
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
Using RPC Bootparams for network configuration information.
*********
I have set the right parameters in system.conf as far as i know.
Is there anyway to get around the error?
Thanks in advance.
Basavaraj.
--
सर्वेषां स्वस्तिर्भवतु । सर्वेषां शांतिर्भवतु ॥ सर्वेशां पूर्णं भवतु ।
सर्वेषां मंगलं भवतु ॥
सर्वे भवंतु सुखिनः । सर्वे सन्तु निरामयाः ॥ सर्वे भद्राणि पष्यंतु। मा
कश्चिद् दुःख़ भाग्भवेत् ॥
May Auspiciousness, Peace, Contentment, Prosperity be unto all.
May all be happy; May all be free from afflictions; May all behold
what is good; May none suffer from sorrow.
|